Stainless Steel 321 Sheet

Stainless Steel 321 Sheet

buy 321H Plate, Alloy 321H Coil, stainless steel 321 plate from 321 stainless steel sheet suppliers, Grade 321 Strip manufacturers, view ss 321 plate price

Stainless steel sheet grade 321 is a titanium with good general properties as well as corrosion resistance. It has excellent resistance between grains or crystals corrosion after exposure to temperatures in the chromium. It also possesses good low temperature toughness. Its properties and material is far better than as compare to the properties of alloys 304 and 304l.

Stainless Steel 321 Sheet

Stainless Steel 321 Sheet

SS 321H Plate

SS 321H Plate

Alloy 321H Coil

Alloy 321H Coil

Special price ss 321 sheet suppliers, Get SS UNS S32100 Slitting Coil, 321 stainless steel coil Stock, stockholder of stainless steel 321 circle, 321 stainless steel plate suppliers, Check ss 321 sheet price

Stainless steel 321H plate is usually used for parts which are unreliably heated up to 1500 degree F along with for continuous service the alloy 321H is good to 1650 degree F.Stainless steel coils grade 321H generally feeling comfortable or satisfy in clean water, but thin sections in coils can be air cooled and this process is important for the formation of chromium carbide which would occur if the material was allowed to slow cool in the furnace etc.

As our Bhansali Brothers. provide the products around the world so the price is different in every country and also depends on the material of our product according to the customer demands but if we talk about the price of SS 321 plate and SS 321 Sheet in US$ dollars so it is in between 1750.00 to 1790.00/Ton.

 

Stainless Steel 321 Plate Specification
Item
 321 Stainless Steel Sheet(Hot rolled, cold rolled)
Standard
 ASTM A240, JIS4304-2005, ASTM A167, EN10088-2-2005, GB/T3280-2007, etc
Material
  • 321 Stainless Steel Sheet
  • SS 321 Sheet
  • UNS S32100 Sheet
  • Ams 5510 Sheet
  • Ams 5510 Plate
  • Ams 5510 Strip
  • Sae-Ams-P-5510 Sheet
  • Ams 5510 Sae Sheet
  • Ams 5510 Stainless Sheet
  • Ams 5510 Type 321 Sheet
  • BS S524 Sheet
  • BS S526 Sheet
  • Ams 5510 Aisi 321 Sheet
  • Ams 5510 Cres 321 Sheet
  • Ams 5510 Foil
  • Ams 5510 Material Sheet
  • DIN / WS 1.4541 Sheet
  • Z10CnNb18-11 Sheet
Grade
 ASTM A240 Grade 321
Type ASTM A240 Type 321 Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate
ASTM A240 Stainless Steel 321 Plate Length 0-12mm or as required
SS UNS S32100 Plate Width 0-2500mm or as required
Stainless Steel 321 Hot Rolled Plate Thickness 0.3 to 1200 mm or as required
ASME SA240 Stainless Steel 321 Plate Process Hot/ Cold Rolled
Brand Name
Baosteel, Outokumpu, POSCO, Thyssenkrup, Sail, Acerinox, TISCO, Aperam, Jindal Stainless, Nas, DKC Korea, Arcelor Mittal, Nippon Metal
Origin
Indian Origin, European Origin, Japanese Origin, US Origin, Korea Origin, Thailand Origin, Taiwan Origin
Finish Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)
ASTM A240 Stainless Steel 321 Plate surface No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM A240 Stainless Steel 321 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.
Package
 Standard Export Seaworthy Package, or as required.
Container
 20ft GP: 5898mm(length)x2352mm(width)x2393mm(high)
Size
 40ft GP: 12032mm(length)x2352mm(width)x2393mm(High)
40ft HC: 12032mm(length)x2352mm(width)x2698mm(high)
Price term
 Ex-Work, FOB, CNF, CFR, CIF
MTC
 Mill Test Certificate, Available as per EN 10204 3.1

 

SS 321 Plate Price in India
Price of Stainless Steel 321 Sheet manufacturer in India Stainless Steel 321 Sheet Price in India (INR) Stainless Steel 321 Sheet Price in UK Pound sterling SS 321 Sheet Price in UAE Dirham

Stainless Steel Plate A 240 Tp 321 Size: 1250 X 2500 X 9.5 Mm

 59,310 INR 638.04 UK Pound sterling 3019.35 UAE Dirham

Hot Rolled Stainless Steel Wide Plates (Having > 8%) 20mmx1500mmx6000 -321/No1/Mill Edge Fr.Pr.Ss. 600 Mm

 143 INR 1.54 UK Pound sterling 7.28 UAE Dirham

 SS 321 Plate 20mm X 8 X4

 283 INR 3.04 UK Pound sterling 14.41 UAE Dirham

This is an approximate Cost of SS UNS S32100 Sheet in India. For factory price buy directly from Stainless Steel 321 Plate manufacturers in India, check latest ASTM A240 Stainless Steel 321 Plate price list & stock sizes please mail us.

SS 321 Sheets (Rs Per Kg), Price in INR
Size 8'x4' or 1000x2000
MM
SS 321
0.5 350 INR
0.6 350 INR
0.7 390 INR
0.9 390 INR
1.2 395 INR
1.4 395 INR
2 395 INR
3 390 INR
4 380 INR
5 380 INR
6 380 INR
8 380 INR
10 380 INR
12 395 INR
16 395 INR
20 395 INR
25 450 INR
50 450 INR


What is Stainless Steel 321 Plate?

There are some common applications of stainless steel sheet grade 321 such as expansion joints, chemical processing etc.Stainless steel 321 sheets, SS 321H plates, 321H coils, 321 strips are manufacture in our company under high class well educated and experienced staff. The high quality material is used to develop every product in our company.Our company also provide the SS 321H plates and alloy 321H coil which plays a vital role in cold working around the world.

 

Ready Stock of 321 Stainless Steel Perforated Sheet, 321 stainless steel strips, importer of sus 321 stainless steel Shim Sheet, AISI 321 Hot Rolled Plate, Find ss 321 plate weight calculator online

 

Stainless Steel 321 Sheets, Plates & Coils Finishes as per ASTM A240M

Surface Finish

Definition

Application

2B

Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.

Medical equipment, Food industry, Construction material, Kitchen utensils.

BA

Those processed with bright heat treatment after cold rolling.

Kitchen utensils, Electric equipment, Building construction.

NO.3

Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.

Kitchen utensils, Building construction.

NO.4

Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.

Kitchen utensils, Building construction, Medical equipment.

HL

Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.

Building Construction.

NO.1

The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.

Chemical tank, pipe

 

ASTM A240 Stainless Steel 321 Plate melting range
Plate Type
 Melting Point
Stainless Steel 321 Plate
 1398-1446°C
2550-2635°F

 

ASME SA240 Stainless Steel 321 Plate density
Plate Type
Density
Stainless Steel 321 Plate
7.92 g/cm3

 

Plain & Polished 321 Stainless Steel Sheet

suppliers of a range of polished stainless steel 321 sheets, finishes include Natural, Bright, Brushed, Dull Polished, Mirror and Embossed Rigidised

PRODUCT
FINISH
THICKNESS MM
MAX SHEET SIZE MM
Grade 321
Plain 2B
0.9
2000 x 1000
Bright
0.9
2000 x 1000
Brushed Finish
0.9, 1.2
2000 x 1000, 2500 x 1250
Rimex Super Mirror
0.8, 1.2
2400 x 1200, 2500 x 1250
Embossed
0.8, 1.0
2500 x 1250

 

Perforated Stainless Steel Sheet 321

We now offer circle cutting in ss Grade 321 perforated sheets up to 1000mm diameter.

Hole Dia mm
Hole Centres mm
O/A
Finish
Tck mm
Full Sheet Size mm
0.75
1.5
23%
2B
0.6
2000 x 1000
1
2
23%
2B
1.0
2000 x 1000
1.5
2.6
30%
2B
1.0
2000 x 1000
2
3.5
30%
2B
1.0
2000 x 1000
2
3.5
30%
2B
1.0
2000 x 1000
3
5
33%
2B
1.0
2000 x 1000
4
5.6
46%
2B
1.0
2000 x 1000
5
8
35%
2B
1.0
2000 x 1000
6
8
51%
2B
1.0
2000 x 1000
8
10
58%
2B
1,0
2000 x 1000

 

Types of Stainless Steel 321 Plate
AISI 321 Strip
AISI 321 Strip
SS UNS S32100 Shim Sheet
SS UNS S32100 Shim Sheet
SUS 321 Hot Rolled Strip Tape
SUS 321 Hot Rolled Strip Tape
SS Werkstoff No 1.4541 Chequered Plate
SS Werkstoff No 1.4541 Chequered Plate
SS 321 Sheet
SS 321 Sheet
SS UNS S32100 Plate
SS UNS S32100 Plate
Stainless Steel 321 Hot Rolled Coil
Stainless Steel 321 Hot Rolled Coil
ASME SA240 Stainless Steel 321 Foil
ASME SA240 Stainless Steel 321 Foil
No. 4 Finish SS 321 Mesh Plate
No. 4 Finish SS 321 Mesh Plate
Cut To Size 321 Stainless Steel Checker Plate
Cut To Size 321 Stainless Steel Checker Plate
No. 4 Brushed Finish AISI 321 Hot Rolled Plate
No. 4 Brushed Finish AISI 321 Hot Rolled Plate
#8 Finish SS UNS S32100 Cold Rolled Plate
#8 Finish SS UNS S32100 Cold Rolled Plate
321 Perforated Stainless Steel Sheet
321 Perforated Stainless Steel Sheet
SS Grade 321 Hot Rolled Shim Stock
SS Grade 321 Hot Rolled Shim Stock
8 Mirror Finish SS Grade 321 Clad Plate
8 Mirror Finish SS Grade 321 Clad Plate
2B Finish Stainless Steel 321 Cold Rolled Sheet
2B Finish Stainless Steel 321 Cold Rolled Sheet

 

Stainless Steel 321 Plate Stock

Types of Stainless Steel 321 Plate we stock:

  • 8 Mirror Finish Stainless Steel 321 Clad Plate
  • #8 Finish AISI 321 Embossed Plate
  • No. 4 Finish Stainless Steel 321 1/4 Inch Plate
  • SS 10mm Plate
  • SS 321 Plate Mirror Finish
  • ASTM A240 Stainless Steel 321 Chequered Plate
  • Cut To Size 321 Stainless Steel Custom Cut Plate
  • Stainless Steel 321 Hot Rolled Hot Rolled Plate
  • Stainless Steel 321 Checker Plate
  • SS UNS S32100 Plate
  • 2B Finish Stainless Steel 321 Chequer Plate
  • ASME SA240 Stainless Steel 321 Cold Rolled Plate
  • Stainless Steel 321 Hot Rolled Plate Mill Finish
  • No. 4 Brushed Finish Stainless Steel 321 Checkered Plate
  • ASTM A240 Stainless Steel 321 Plate 2b Finish
  • ASTM A240 Stainless Steel 321 Plate Brushed Finish
  • SS UNS S32100 Plasma Cutting Plate
  • ASTM A240 Stainless Steel 321 Polished Plate
  • Stainless Steel 321 Tisco Plate
  • ASTM A240 SUS 321 Laser Cut Plate
  • ASTM A240 Stainless Steel 321 Perforated Plate
  • Cut To Size 321 SS Cold Rolled Sheet
  • No. 4 Finish SS Grade 321 Hot Rolled Sheet
  • SS 321 Chequered Plate
  • No. 4 Brushed Finish Stainless Steel 321 Perforated Sheet
  • #8 Finish Stainless Steel 321 Sheet
  • ASME SA240 Stainless Steel 321 Rolling Plate
  • SS Werkstoff No 1.4541 Hot Rolled Bbq Plate
  • 2B Finish Stainless Steel 321 Thin Plate
  • Stainless Steel 321 Hot Rolled Quarto Plate
  • SS 321 Tread Plate
  • 8 Mirror Finish Stainless Steel 321 Diamond Plate

 

Stainless Steel 321 Plate Dimensions

ASTM A240 Stainless Steel 321 Plate Metric Dimensions

Plate Surface finish
Thickness (mm)
Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate
0.25–8.0
2032
2D – Cold rolled, heat treated, pickled plate
0.4–6.35
1524
2E – Cold rolled, heat treated, mechanically descaled plate
0.4–8.0
2032
2R – Cold rolled, bright annealed plate
0.25–3.5
1524
2H – Work hardened plate
0.4–6.35
1524
Polished, brushed plate
0.5–4.0
1524

 

ASTM A240 Stainless Steel 321 Plate Imperial Dimensions

Plate Surface finish
Gauge (in)
Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate
10–24
72*
2D – Cold rolled, heat treated, pickled plate
12–24
60
BA Mexinox only
18–28
48
Polished plate (not brushed)
11–24
60
Temper rolled plate Mexinox only
13–29
48

 

Stainless Steel Sheets -Type 321 | No. 2B Finish — Cold Rolled, Annealed

*No 2D Finish | No. 3 Finish — Polished One Side | No. 4 Finish — Polished One Side

Stainless Steel Gauge, Width and Length
Weight
Lbs. per Sq Ft.
Est. Wt. per Sheet
7GA (.1874")
48 x 96
7.871
251.9
48 x 120
7.871
314.8
48 x 144
7.871
377.8
10GA (.135”)
36 x 120
5.670
170.1
48 x 96
5.670
181.4
48 x 120
5.670
226.8
60 x 120*
5.670
283.5
60 x 144*
5.670
340.2
72 x 120*
5.670
340.2
11 GA (.120")
36 x 96
5.040
121.0
36 x 120
5.040
151.2
36 x 144
5.040
181.4
48 x 96
5.040
161.3
48 x 120
5.040
201.6
48 x 144
5.040
241.9
60 x 120
5.040
252.0
60 x 144
5.040
302.4
72 x 120*
5.040
302.4
72 x 144*
5.040
362.9
12 Ga. (.105")
36 x 96
4.410
105.8
36 x 120
4.410
132.3
36 x 144
4.410
158.8
42 x 120
4.410
154.4
48 x 96
4.410
141.1
48 x 120
4.410
176.4
48 x 144
4.410
211.7
60 x 96
4.410
176.4
60 x 120
4.410
220.5
60 x 144
4.410
264.6
72 x 120*
4.410
264.6
72 x 144
4.410
317.5
13 Ga (.090")
36 x 96
3.780
90.72
36 x 120
3.780
113.4
48 x 120
3.780
151.2
14 Ga. (.075")
30 x 120
3.150
78.75
36 x 96
3.150
75.60
36 x 120
3.150
94.50
36 x 144
3.150
113.4
42 x 120
3.150
110.3
42 x 144
3.150
132.3
48 x 96
3.150
100.8
48 x 120
3.150
126.0
48 x 144
3.150
151.2
60 x 120
3.150
157.5
60 x 144
3.150
189.0
72 x 120
3.150
189.0
72 x 144
3.150
226.8
16 Ga. (.060")
30 x 96
2.520
50.40
30 x 120
2.520
63.00
36 x 96
2.520
60.48
36 x 120
2.520
75.60
36 x 144
2.520
90.72
42 x 120
2.520
88.20
48 x 96
2.520
80.64
48 x 120
2.520
100.8
48 x 144
2.520
121.0
60 x 96
2.520
100.8
60 x 120
2.520
126.0
60 x 144
2.520
151.2
18 Ga. (.048")
30 x 96
2.016
40.32
30 x 120
2.016
50.40
36 x 96
2.016
48.38
36 x 120
2.016
60.48
36 x 144
2.016
72.58
42 x 120
2.016
70.56
48 x 96
2.016
64.51
48 x 120
2.016
80.64
48 x 144
2.016
96.77
60 x 120
2.016
100.8
60 x 144
2.016
121.0
19 Ga. (.042")
36 x 120
1.764
52.92
20 Ga. (.036")
30 x 96
1.512
30.24
30 x 120
1.512
37.80
36 x 96
1.512
36.29
36 x 120
1.512
45.36
36 x 144
1.512
54.43
42 x 120
1.512
52.92
48 x 96
1.512
48.38
48 x 120
1.512
60.48
48 x 144
1.512
72.58
22 Ga. (.030")
30 x 96
1.260
25.20
30 x 120
1.260
61.50
36 x 96
1.260
30.24
36 x 120
1.260
37.80
36 x 144
1.260
45.36
48 x 96
1.260
40.32
48 x 120
1.260
50.40
24 Ga. (.024")
30 x 96
1.008
20.16
30 x 120
1.008
25.20
36 x 96
1.008
24.19
36 x 120
1.008
30.24
48 x 96
1.008
32.26
48 x 120
1.008
40.32
26 Ga. (.018")
30 x 96
.7560
15.12
30 x 120
.7560
18.90
36 x 96
.7560
18.14
36 x 120
.7560
22.68
48 x 96
.7560
24.1
48 x 120
.7560
30.24
28 Ga. (.015")
36 x 96
.630
15.12
36 x 120
.630
18.90

 

Type 321 – Flattened | Long way of diamond runs parallel to length of sheet
Style Designation
Size in Inches
Wt. per Sq. Ft. in Lbs.
Wt. Per Sheet
Expanded SS 321 Sheets
3/4__9
48 x 96
1.95
62.4
Expanded SS 321 Sheets
1/2__13
48 x 96
1.78
56.9
Expanded SS 321 Sheets
1/2__16
48 x 96
0.86
27.5
Expanded SS 321 Sheets
1/2__18
48 x 96
0.69
22.1
Expanded SS 321 Sheets
1-1/2__9
48 x 96
1.31
41.9
Expanded SS 321 Sheets
3/4__13
48 x 96
0.86
27.5
Expanded SS 321 Sheets
3/4__16
48 x 96
0.57
18.2
Expanded SS 321 Sheets
3/4__18
48 x 96
0.46
14.7
Expanded SS 321 Sheets
1-1/2__13
48 x 96
0.65
20.8

 

SS 321 Plate Weight per Unit

Stainless Steel 321 Plate Weight per Unit, Stainless Steel 321 Sheet Weight & Density

Thickness
Plate Weight per Unit Area
Density
3/16 inches
0.06000 lbs/in²42.184176 kg/m²
0.315 lbs/in³8.72 g/cm³
1/4 inches
0.08 lbs/in²56.245568 kg/m²
0.315 lbs/in³8.72 g/cm³
3/8 inches
0.121 lbs/in²85.0714216 kg/m²
0.315 lbs/in³8.72 g/cm³
1/2 inches
0.161 lbs/in²113.1942056 kg/m²
0.315 lbs/in³8.72 g/cm³
5/8 inches
0.196 lbs/in²137.8016416 kg/m²
0.315 lbs/in³8.72 g/cm³
3/4 inches
0.235 lbs/in²165.221356 kg/m²
0.315 lbs/in³8.72 g/cm³
7/8 inches
0.274 lbs/in²192.6410704 kg/m²
0.315 lbs/in³8.72 g/cm³
1 inches
0.313 lbs/in²220.0607848 kg/m²
0.315 lbs/in³8.72 g/cm³
1 1/4 inches
0.391 lbs/in²274.9002136 kg/m²
0.315 lbs/in³8.72 g/cm³
1 1/2 inches
0.47 lbs/in²330.442712 kg/m²
0.315 lbs/in³8.72 g/cm³
1 3/4 inches
0.549 lbs/in²385.9852104 kg/m²
0.315 lbs/in³8.72 g/cm³
2 inches
0.627 lbs/in²440.8246392 kg/m²
0.315 lbs/in³8.72 g/cm³
2 1/4 inches
0.705 lbs/in²495.664068 kg/m²
0.315 lbs/in³8.72 g/cm³
2 1/2 inches
0.784 lbs/in²551.2065664 kg/m²
0.315 lbs/in³8.72 g/cm³
2 3/4 inches
0.862 lbs/in²606.0459952 kg/m²
0.315 lbs/in³8.72 g/cm³
3 inches
0.941 lbs/in²661.5884936 kg/m²
0.315 lbs/in³8.72 g/cm³

 

SS UNS S32100 Plate Sizes

Sheet Thickness

Sheet Size

Sheet Weight per Unit Area

Estimated Weight per Sheet
0.0178 inches 0.45212 mm 48 x 120 0.756 lbs/ft²3.690792 kg/m² 30.24 lbs13.69872 kg
0.02 inches 0.508 mm 36 x 120 0.840 lbs/ft²4.10088 kg/m² 25.20 lbs11.4156 kg
0.02 inches 0.508 mm 48 x 120 0.840 lbs/ft²4.10088 kg/m² 33.60 lbs15.2208 kg
0.0235 inches 0.5969 mm 48 x 120 1.008 lbs/ft²4.921056 kg/m² 42.32 lbs19.17096 kg
0.0321 inches 0.81534 mm 36 x 120 1.353 lbs/ft²6.605346 kg/m² 40.58 lbs18.38274 kg
0.0321 inches 0.81534 mm 48 x 120 1.353 lbs/ft²6.605346 kg/m² 54.10 lbs24.5073 kg
0.0355 inches 9.017 mm 48 x 96 1.512 lbs/ft²7.381584 kg/m² 48.39 lbs21.92067 kg
0.0355 inches 9.017 mm 48 x 120 1.512 lbs/ft²7.381584 kg/m² 60.49 lbs27.40197 kg
0.042 inches 1.0668 mm 36 x 120 1.764 lbs/ft²8.611848 kg/m² 52.93 lbs23.97729 kg
0.042 inches 1.0668 mm 48 x 120 1.764 lbs/ft²8.611848 kg/m² 70.57 lbs31.96821 kg
0.048 inches 1.2192 mm 36 x 120 2.016 lbs/ft²9.842112 kg/m² 60.49 lbs27.40197 kg
0.048 inches 1.2192 mm 48 x 96 2.016 lbs/ft²9.842112 kg/m² 64.52 lbs29.22756 kg
0.048 inches 1.2192 mm 48 x 120 2.016 lbs/ft²9.842112 kg/m² 80.65 lbs36.53445 kg
0.060 inches 1.524 mm 36 x 96 2.520 lbs/ft²12.30264 kg/m² 60.49 lbs27.40197 kg
0.060 inches 1.524 mm 36 x 120 2.520 lbs/ft²12.30264 kg/m² 75.61 lbs34.25133 kg
0.060 inches 1.524 mm 48 x 120 2.520 lbs/ft²12.30264 kg/m² 100.81 lbs45.66693 kg
0.075 inches 1.905 mm 48 x 120 3.150 lbs/ft²15.3783 kg/m² 126.01 lbs57.08253 kg
0.12 inches 3.0480 mm 48 x 96 5.041 lbs/ft²24.610162 kg/m² 161.30 lbs73.0689 kg
0.12 inches 3.0480 mm 48 x 120 5.041 lbs/ft²24.610162 kg/m² 201.62 lbs91.33386 kg

 

stainless steel 321 sheet , Plate & Coil Thickness
0.6 mm 0.8 mm
1.0 mm 1.2 mm
1.5 mm 1.6 mm
1.8 mm 2.0 mm
3.0 mm 4.0 mm
5.0 mm 6.0 mm
8.0 mm 10.0 mm
12.0 mm 15.0 mm
20.0 mm 25.4 mm

 

SS 321 Sheet & Foil Thickness
Thickness (in mm)
0.004, Temper: As rolled 0.2, Temper: Annealed
0.005, Temper: As rolled 0.2, Temper: Half hard
0.0065, Temper: As rolled 0.25, Temper: Annealed
0.0076, Temper: As rolled 0.25, Temper: Half hard
0.01, Temper: As rolled 0.30, Coil width: 15.5, Temper: Half hard
0.02, Temper: As rolled 0.38, Temper: Annealed
0.02, Temper: Half hard 0.5, Temper: Half hard
0.025, Temper: As rolled, Condition: Surface oxide 0.75, Temper: Half hard
0.025, Temper: As rolled 1.0, Temper: Annealed
0.05, Temper: Half hard 2.0, Temper: 1/4 Hard
0.05, Temper: Quarter hard 2.0, Temper: Half hard
0.075, Temper: Half hard 3.0, Temper: Annealed
0.1, Temper: Half hard 3.0, Temper: 1/4 Hard
0.1, Coil width: 10, Temper: Half hard 6.35, Temper: Hard
0.125, Temper: Half hard 0.15, Coil width: 0.3, Temper: Half hard
0.15, Temper: Half hard

321 Stainless Steel Sheet Gauges

The following chart lists the approximate decimal equivalents for sheet metal gauges along with standard tolerances. Please note that industry standard permits deviations from nominal thicknesses.
NOMINAL DECIMAL
STANDARD VARIANCE FROM
SHEET METAL GAUGE
(APPROXIMATE INCHES)
NOMINAL DECIMAL (+/- INCHES)
7
0.1793
0.0080
8
0.1644
0.0080
9
0.1495
0.0080
10
0.1345
0.0070
11
0.1196
0.0050
12
0.1046
0.0050
13
0.0897
0.0050
14
0.0747
0.0040
15
0.0673
0.0040
16
0.0598
0.0030
17
0.0538
0.0030
18
0.0478
0.0030
19
0.0418
0.0030
20
0.0359
0.0030
21
0.0329
0.0025
22
0.0299
0.0020
23
0.0269
0.0020
24
0.0239
0.0020
25
0.0209
0.0015
26
0.0179
0.0015
28
0.0149
0.0010

 

 

Difference Between Stainless Steel 321 Sheet, Plate & Foil

diffrence

 

  • If thickness greater than 0.15 mm and less than 6.35mm is called a ASTM A240 Grade 321 Sheet.
  • If thickness greater than 6.35 mm is called a SA 240 type 321 Plate.
  • If thickness less than 0.15mm is then its a ASTM A240 Type 321 Foil.

 

321 Stainless Steel Sheet for Sale
Grades
Thickness
Availability
321 Stainless Steel Sheets
.012
√
321 Sheets Stainless Steel
.016
√
321 Stainless Sheets
.020
√
SS 321 Sheets
.025
√
321 SS Sheets
.032
√
Aisi 321 Sheets
.040
√
Din 1.4005 Sheets
.050
√
UNS S41600 Sheets
.063
√
Alloy 321 Sheets
.071
√
AMS 5645 Sheets
.080
√
AMS 5510 Sheets
.090
√
321 SS Sheets
.100
√
Aisi 321 Sheets
.125
√

 

ASME SA240 Stainless Steel 321 Plate Chemical Composition

Grade

C

Mn

Si

P

S

Cr

Mo

Ni

N

Other

321

min.

max

-

0.08

2.00

0.75

0.045

0.030

17.0

19.0

-

9.0

12.0

0.10

Ti=5(C+N)

0.70

321H

min.

max

0.04

0.10

2.00

0.75

0.045

0.030

17.0

19.0

-

9.0

12.0

-

Ti=4(C+N)

0.70

 

Stainless Steel 321 Plate mechanical properties
Mechanical properties of 321 grade stainless steel Plates & Sheets

Grade

Tensile Strength (MPa) min

Yield Strength 0.2% Proof (MPa) min

Elongation (% in 50mm) min

Hardness

Rockwell B (HR B) max

Brinell (HB) max

321

515

205

40

95

217

321H

515

205

40

95

217

 

 

Stainless Steel 321 Plate Equivalent

Grade

UNS No

Old British

Euronorm

Swedish SS

Japanese JIS

BS

En

No

Name

321

S32100

321S31

58B, 58C

1.4541

X6CrNiTi18-10

2337

SUS 321

321H

S32109

321S51

-

1.4878

X10CrNiTi18-10

-

SUS 321H

 

Stainless Steel 321 Plate Other Related Speicifcation
AMS 5510
UNS S32100
ASTM A167
PWA-LCS
GE-S400/1000
RR SABRe Edition 2
DFARS Compliant

 

Physical Properties Of 321 Stainless Steel Sheet:
Physical properties of 304 grade stainless steel in the annealed condition

Grade

Density (kg/m3)

Elastic Modulus (GPa)

Mean Coefficient of Thermal Expansion (μm/m/°C)

Thermal Conductivity (W/m.K)

Specific Heat 0-100°C (J/kg.K)

Electrical Resistivity (nΩ.m)

0-100°C

0-315°C

0-538°C

at 100°C

at 500°C

321

8027

193

16.6

17.2

18.6

16.1

22.2

500

720

 

Specific Heat
Temperature Range
J/kg K
Btu/lb · °F
°C
°F
0-100
32-212
500
0.12

 

Magnetic Permeability
  • H/m Annealed
  • 1.02 Max

 

Electrical Resistivity
Temperature Range microhm·cm
°C °F
20 68 72
100 213 78
200 392 86
400 752 100
600 1112 111
800 1472 121
900 1652 126

 

Stainless Steel 321 Plate Processing

Stainless Steel 321 Plate Processing Options

2 Plasma Cutting Tables

 Stainless Steel 321 plate can be plasma cut from 3/16″ thick thru 6.25″ thick.

4 Dynamic Waterjet Tables

 Stainless Steel 321 plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 321 Plate.

4 Kasto Plate Saws

 Stainless Steel 321 plate or bar from 1/2″ thick thru 22″ thick Stainless Steel 321 can be Kasto saw cut.

1 plate laser

 Stainless Steel 321 sheet gauges thru 1-1/8″ thick Stainless Steel 321 plate can be laser cut.

3 Plate Shears

 Stainless Steel 321 plate thru 3/4″ thick can be shear cut to size.

Gauer Processing

 Stainless Steel 321 sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.

Machine Cutting

 Stainless Steel 321 rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter

Stainless 321 Plate Leveling

 In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 321 Plate coil, thru 78.75″ wide (2 meter)

 

Hot sale of aisi 321 stainless steel sheet, 321 stainless steel foil in india, wholesaler of ASTM A240 Stainless Steel 321 Cold Rolled Plate, SS Werkstoff No 1.4541 Chequered Plate

 

SS 321 Sheet Application Industries
  • Pharmaceutical equipment
  • Chemical process vessels
  • Automotive Industry
  • Conveyors
  • Marine
  • Architectural
  • Heat exchangers
  • Food Processing and handling
 industry

 

Stainless Steel 321 Sheet Application
  • AMS 5645 Sheet Used in Spiral Welded tube for burner pipes and flues
  • SS 321 Sheet Used in Chemical containers, including for transport
  • Aisi 321 Sheet Used in Heat Exchangers
  • AMS 5645 Sheet Used in construction materials
  • AMS 5510 Sheet Used in Bellows
  • Alloy 321 Used in Architectural applications
  • 321 Stainless Sheet Used in Heating element tubing
  • 321 Stainless Steel Sheet Used in Expansion joints
  • 321 Stainless Steel Sheet Used in Aircraft exhaust manifolds
  • AMS 5510 Sheet Used in Woven or welded screens for high temperature mineral processing
  • Aisi 321 Sheet Used in Furnace parts

 

Stainless Steel 321 Plate Value Added Services
Material Testing:
  • Hardness Test
  • Intergranular Corrosion (IGC) Test
  • Chemical Analysis – Spectro Analysis
  • Positive Material Identification – PMI Testing
  • Flaring Test
  • Micro and MacroTest
  • Flattening Test
  • Mechanical Testing Such as Tensile of Area
  • Pitting Resistance Test

Documentation & Packaging:

  • Test Certificates certifying NACE MR0103, NACE MR0175
  • Quality Assurance Plan (QAP)
  • Packing List including Complete Details
  • Material Traceability Records
  • Heat Treatment Charts
  • Guarantee Letter
  • NABL approved Laboratory Test Reports
  • Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
  • Commercial Invoice including HS Code

 

Stainless Steel 321 Plate Inventory
  • SS WERKSTOFF NR. 1.4541 Cold Rolled Plates
  • 321 Stainless Steel Strips
  • 321 Stainless Steel Cold Rolled Plates
  • SS 321 Coils
  • 321 SS Hot Rolled Plates
  • SS WERKSTOFF NR. 1.4541 Coils
  • SS 321 Hot Rolled Plates
  • SS 321 Cold Rolled Plates
  • 321 Stainless Steel Polished Plates
  • ASTM A240 321 Stainless Steel Hot Rolled Plates
  • 321 Stainless Steel Coils
  • SS WERKSTOFF NR. 1.4541 Hot Rolled Plates
  • ASME SA240 321 Stainless Steel Strips
  • ASTM A240 321 Stainless Steel Cold Rolled Plates
  • 321 SS Coils
  • SS UNS S32100 Hot Rolled Plates
  • SS 321 Strips
  • 321 Stainless Steel Hot Rolled Plates
  • 321 SS Strips
  • SS WERKSTOFF NR. 1.4541 Strips
  • SS UNS S32100 Strips
  • SS WERKSTOFF NR. 1.4541 Polished Plates
  • A240 321 Stainless Steel Coils
  • 321 SS Foils
  • SS 321 Foils
  • SS UNS S32100 Polished Plates
  • 321 SS Cold Rolled Plates
  • ASME SA240 321 Polished Plates
  • SS UNS S32100 Coils
  • SS UNS S32100 Cold Rolled Plates
  • 321 SS Circle
  • 321 SS Shim Sheet
  • SS 321 Circle
  • 321 Stainless Steel Perforated Sheet
  • SS 321 Perforated Sheet
  • SS WERKSTOFF NR. 1.4541 Perforated Sheet
  • Stainless Steel 321 Chequered Plate
  • ASTM A240 321 Stainless Steel Shim Sheet
  • SS UNS S32100 Shim Sheet
  • 321 Stainless Steel Foils
  • SS WERKSTOFF NR. 1.4541 Circle
  • SS 321 Shim Sheet
  • 321 SS Polished Plates
  • 321 SS Chequered Plate
  • SS WERKSTOFF NR. 1.4541 Foils
  • ASTM A240 Stainless Steel 321 Foils
  • SS UNS S32100 Circle
  • SS 321 Polished Plates
  • 321 SS Perforated Sheet
  • SS UNS S32100 Foils
  • SS WERKSTOFF NR. 1.4541 Shim Sheet
  • SS UNS S32100 Perforated Sheet
  • ASTM A240 Stainless Steel 321 Circle
  • SS UNS S32100 Chequered Plate
  • SS WERKSTOFF NR. 1.4541 Chequered Plate
  • 321 Stainless Steel Shim Sheet
  • ASTM A240 Stainless Steel 321 Perforated Sheet
  • 321 Stainless Steel Chequered Plate
  • SS 321 Chequered Plate
  • 321 Stainless Steel Circle

 

buy from ss 321 plate and ss grade 321 sheet suppliers, stockist of ASME SA240 Stainless Steel 321 Polished Plate, 321 SS 2B Plate

 

© 2024 Bhansali Brothers All Rights Reserved. Designed By MESOTEK.