Stainless Steel 420 Sheet

Cut to size AISI 420 plate, UNS S42000 coil Stock, buy from stainless steel 420 plate, 1.4021 Strip suppliers, AMS 5506 Sheet, 420 grade stainless steel sheet manufacturers in India

Stainless Steel is one of the market's most flexible products, providing very decent technical properties and standards. The steel alloy has a low chromium content, which offers impressive corrosion resistance and outstanding resilience for applications at high temperatures. Also, the chemical additives of steel exhibit strong properties as well.

Stainless Steel 420 Sheet

AISI 420 Plate

UNS S42000 Coil

Special price for 420 ss sheet metal, ss 420 plate, Oldest 420 stainless steel sheet suppliers, Stockist of Stainless steel uns s42000 Foil, 420 stainless steel strip, dealer of ss 420 coil.

You can find an extensive range of stainless steel grades on the market, which perhaps used in the manufacturing of high-quality SS goods. But keeping all those grades aside, 420 or 1.4021 Strip grade is one of the most commonly produced material that is excessively being utilized for stainless steel 420 plate manufacturing on the market, and all credit goes to the UNS S42000 Coil grade excellent properties.

The leading benefits include:-

The AISI 420 Plate encompasses rust-resistant martensitic stainless steel. It has high toughness and high carbon content offering outstanding resistance to corrosion and incredible wear resistance. 420-grade stainless steel sheet is a 410 variant that is lighter in carbon; so it can be hardened by heat treatment like other non-stainless steels.

The leading benefits of using 420 includes:-

Ultimate for high-temperature service
Brilliant mechanical properties
Overcomes sensitization and intergranular corrosion concerns
When compared with 304, the 304 incorporates higher creep stress and rupture properties
It can be used in high-temperature applications for Pressure Vessel Code and ASME Boiler applications

Stainless Steel 420 Plate Specification

Item

420 Stainless Steel Sheet(Hot rolled, cold rolled)

Standard

ASTM A240, JIS4304-2005, ASTM A167, EN10088-2-2005, GB/T3280-2007, etc

Material

420 Stainless Steel Sheet
SS 420 Sheet
UNS S42000 Sheet
Ams 5506 Sheet
Ams 5506 Plate
Ams 5506 Strip

Sae-Ams-P-5506 Sheet
Ams 5506 Sae Sheet
Ams 5506 Stainless Sheet
Ams 5506 Type 420 Sheet
BS S524 Sheet
BS S526 Sheet

Ams 5506 Aisi 420 Sheet
Ams 5506 Cres 420 Sheet
Ams 5506 Foil
Ams 5506 Material Sheet
DIN / WS 1.4021 Sheet
Z10CnNb18-11 Sheet

Grade

ASTM A240 Grade 420

Type

ASTM A240 Type 420 Plate, Sheet, Strip, Coils, Foils, Flats, Clad Plate, Plain Sheet, Rolling Sheet, Rolling Plate, Flat Shim, Flat Sheet, Shim Sheet, Rolls, Blank (Circle), sheared, annealed, soft annealed, descaled, tread plate, Checker Plate

ASTM A240 Stainless Steel 420 Plate Length

0-12mm or as required

SS UNS S42000 Plate Width

0-2500mm or as required

Stainless Steel 420 Hot Rolled Plate Thickness

0.3 to 1200 mm or as required

ASME SA240 Stainless Steel 420 Plate Process

Hot/ Cold Rolled

Brand Name

Baosteel, Outokumpu, POSCO, Thyssenkrup, Sail, Acerinox, TISCO, Aperam, Jindal Stainless, Nas, DKC Korea, Arcelor Mittal, Nippon Metal

Origin

Indian Origin, European Origin, Japanese Origin, US Origin, Korea Origin, Thailand Origin, Taiwan Origin

Finish

Hot rolled plate (HR), Cold rolled sheet (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated)

ASTM A240 Stainless Steel 420 Plate surface

No.1, No. 2D, No. 2B, BA, No.3, No.4, No.6, No.7, 2B, 2D, BA NO(8), Cold rolled sheet (CR), Hot rolled plate (HR), SATIN (Met with Plastic Coated), No.1 finish hot rolled ASTM A240 Stainless Steel 420 Plate, 1D, 2B, No.4, BA, 8K, satin, hairline, brush, mirror etc.

Package

Standard Export Seaworthy Package, or as required.

Container

20ft GP: 5898mm(length)x2352mm(width)x2393mm(high)

Size

40ft GP: 12032mm(length)x2352mm(width)x2393mm(High)

40ft HC: 12032mm(length)x2352mm(width)x2698mm(high)

Price term

Ex-Work, FOB, CNF, CFR, CIF

MTC

Mill Test Certificate, Available as per EN 10204 3.1

SS 420 Plate Price in India

Price of Stainless Steel 420 Sheet manufacturer in India	Stainless Steel 420 Sheet Price in India (INR)	Stainless Steel 420 Sheet Price in UK Pound sterling	SS 420 Sheet Price in UAE Dirham
ASTM 420 stainless steel sheet	279291.21 INR	3000 UK Pound sterling / Ton	14196.16 UAE Dirham
HR /CR / Hot Rolled AMS 5506 Sheet	186194.14 INR	2000 UK Pound sterling / Ton	9464.1 UAE Dirham
SUS 420 stainless steel sheet	279291.21INR	3000 UK Pound sterling / Ton	14196.16 UAE Dirham

This is an approximate Cost of SS UNS S42000 Sheet in India. For factory price buy directly from Stainless Steel 420 Plate manufacturers in India, check latest ASTM A240 Stainless Steel 420 Plate price list & stock sizes please mail us.

SS 420 Sheets (Rs Per Kg), Price in INR
Size	8'x4' or 1000x2000
MM	SS 420
0.5	350 INR
0.6	350 INR
0.7	390 INR
0.9	390 INR
1.2	395 INR
1.4	395 INR
2	395 INR
3	390 INR
4	380 INR
5	380 INR
6	380 INR
8	380 INR
10	380 INR
12	395 INR
16	395 INR
20	395 INR
25	450 INR
50	450 INR

What is Stainless Steel 420 Plate?

For instance, the Stainless Steel 420 Sheet specification contains durable consistency in its composition of vanadium, sulfur, and molybdenum. Low carbon content and correct strength properties of this form of stainless steel are also impressive. However, some steels are sometimes produced using methods which require treatments for hardening and tempering.

420 stainless steel sheet for sale, Contact us today for Stainless Steel 420 Cold Rolled Plate, stainless steel 420 coils, stockholder of ss 420 sheet, SUS 420 Circle

Stainless Steel 420 Sheets, Plates & Coils Finishes as per ASTM A240M

Surface Finish	Definition	Application
2B	Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster.	Medical equipment, Food industry, Construction material, Kitchen utensils.
BA	Those processed with bright heat treatment after cold rolling.	Kitchen utensils, Electric equipment, Building construction.
NO.3	Those finished by polishing with No.100 to No.120 abrasives specified in JIS R6001.	Kitchen utensils, Building construction.
NO.4	Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001.	Kitchen utensils, Building construction, Medical equipment.
HL	Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size.	Building Construction.
NO.1	The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling.	Chemical tank, pipe

ASTM A240 Stainless Steel 420 Plate melting range

Plate Type	Melting Point
Stainless Steel 420 Plate	1398-1446°C 2550-2635°F

ASME SA240 Stainless Steel 420 Plate density

Plate Type	Density
Stainless Steel 420 Plate	7.92 g/cm3

Plain & Polished 420 Stainless Steel Sheet

suppliers of a range of polished stainless steel 420 sheets, finishes include Natural, Bright, Brushed, Dull Polished, Mirror and Embossed Rigidised

PRODUCT	FINISH	THICKNESS MM	MAX SHEET SIZE MM
Grade 420	Plain 2B	0.9	2000 x 1000
	Bright	0.9	2000 x 1000
	Brushed Finish	0.9, 1.2	2000 x 1000, 2500 x 1250
	Rimex Super Mirror	0.8, 1.2	2400 x 1200, 2500 x 1250
	Embossed	0.8, 1.0	2500 x 1250

Perforated Stainless Steel Sheet 420

We now offer circle cutting in ss Grade 420 perforated sheets up to 1000mm diameter.

Hole Dia mm	Hole Centres mm	O/A	Finish	Tck mm	Full Sheet Size mm
0.75	1.5	23%	2B	0.6	2000 x 1000
1	2	23%	2B	1.0	2000 x 1000
1.5	2.6	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
2	3.5	30%	2B	1.0	2000 x 1000
3	5	33%	2B	1.0	2000 x 1000
4	5.6	46%	2B	1.0	2000 x 1000
5	8	35%	2B	1.0	2000 x 1000
6	8	51%	2B	1.0	2000 x 1000
8	10	58%	2B	1,0	2000 x 1000

Types of Stainless Steel 420 Plate

AISI 420 Strip

SS UNS S42000 Shim Sheet

SUS 420 Hot Rolled Strip Tape

SS Werkstoff No 1.4021 Chequered Plate

ASTM A240 Stainless Steel 420 Sheet

SS UNS S42000 Plate

Stainless Steel 420 Hot Rolled Coil

ASME SA240 Stainless Steel 420 Foil

No. 4 Finish SS 420 Mesh Plate

Cut To Size 420 Stainless Steel Checker Plate

No. 4 Brushed Finish AISI 420 Hot Rolled Plate

#8 Finish SS UNS S42000 Cold Rolled Plate

420 Perforated Stainless Steel Sheet

SS Grade 420 Hot Rolled Shim Stock

8 Mirror Finish SS Grade 420 Clad Plate

2B Finish Stainless Steel 420 Cold Rolled Sheet

Stainless Steel 420 Plate Stock

Types of Stainless Steel 420 Plate we stock:

Stainless Steel 420 Checker Plate
SS UNS S42000 Plate
ASTM A240 Stainless Steel 420 Plate 2b Finish
No. 4 Finish Stainless Steel 420 1/4 Inch Plate
SS 10mm Plate
Stainless Steel 420 Hot Rolled Hot Rolled Plate
#8 Finish AISI 420 Embossed Plate
ASME SA240 Stainless Steel 420 Cold Rolled Plate
ASTM A240 Stainless Steel 420 Chequered Plate
No. 4 Brushed Finish Stainless Steel 420 Checkered Plate
Cut To Size 420 Stainless Steel Custom Cut Plate
2B Finish Stainless Steel 420 Chequer Plate
8 Mirror Finish Stainless Steel 420 Clad Plate
SS 420 Plate Mirror Finish
Stainless Steel 420 Hot Rolled Plate Mill Finish
ASTM A240 Stainless Steel 420 Plate Brushed Finish

Stainless Steel 420 Hot Rolled Quarto Plate
#8 Finish Stainless Steel 420 Sheets
ASTM A240 Stainless Steel 420 Polished Plate
SS 420 Tread Plate
Cut To Size 420 SS Cold Rolled Sheets
ASTM A240 Stainless Steel 420 Perforated Plate
No. 4 Finish SS Grade 420 Hot Rolled Sheets
SS 420 Chequered Plate
ASME SA240 Stainless Steel 420 Rolling Plate
SS Werkstoff No 1.4021 Hot Rolled Bbq Plate
No. 4 Brushed Finish Stainless Steel 420 Perforated Sheets
8 Mirror Finish Stainless Steel 420 Diamond Plate
SS UNS S42000 Plasma Cutting Plate
2B Finish Stainless Steel 420 Thin Plate
Stainless Steel 420 Tisco Plate
ASTM A240 SUS 420 Laser Cut Plate

Stainless Steel 420 Plate Dimensions

ASTM A240 Stainless Steel 420 Plate Metric Dimensions

Plate Surface finish	Thickness (mm)	Width (max mm)
2B – Cold rolled, heat treated, pickled, skin passed plate	0.25–8.0	2032
2D – Cold rolled, heat treated, pickled plate	0.4–6.35	1524
2E – Cold rolled, heat treated, mechanically descaled plate	0.4–8.0	2032
2R – Cold rolled, bright annealed plate	0.25–3.5	1524
2H – Work hardened plate	0.4–6.35	1524
Polished, brushed plate	0.5–4.0	1524

ASTM A240 Stainless Steel 420 Plate Imperial Dimensions

Plate Surface finish	Gauge (in)	Width (max in)
2B – Cold rolled, heat treated, pickled, skin passed Plate	10–24	72*
2D – Cold rolled, heat treated, pickled plate	12–24	60
BA Mexinox only	18–28	48
Polished plate (not brushed)	11–24	60
Temper rolled plate Mexinox only	13–29	48

Stainless Steel Sheets -Type 420 | No. 2B Finish — Cold Rolled, Annealed

*No 2D Finish | No. 3 Finish — Polished One Side | No. 4 Finish — Polished One Side

	Stainless Steel Gauge, Width and Length	Weight Lbs. per Sq Ft.	Est. Wt. per Sheet
	7GA (.1874")
ss 420 sheet	48 x 96	7.871	251.9
ss 420 sheet	48 x 120	7.871	314.8
ss 420 sheet	48 x 144	7.871	377.8
	10GA (.135”)
ss 420 sheet	36 x 120	5.670	170.1
ss 420 sheet	48 x 96	5.670	181.4
ss 420 sheet	48 x 120	5.670	226.8
ss 420 sheet	60 x 120*	5.670	283.5
ss 420 sheet	60 x 144*	5.670	340.2
ss 420 sheet	72 x 120*	5.670	340.2
	11 GA (.120")
ss 420 sheet	36 x 96	5.040	121.0
ss 420 sheet	36 x 120	5.040	151.2
ss 420 sheet	36 x 144	5.040	181.4
ss 420 sheet	48 x 96	5.040	161.3
ss 420 sheet	48 x 120	5.040	201.6
ss 420 sheet	48 x 144	5.040	241.9
ss 420 sheet	60 x 120	5.040	252.0
ss 420 sheet	60 x 144	5.040	302.4
ss 420 sheet	72 x 120*	5.040	302.4
ss 420 sheet	72 x 144*	5.040	362.9
	12 Ga. (.105")
ss 420 sheet	36 x 96	4.410	105.8
ss 420 sheet	36 x 120	4.410	132.3
ss 420 sheet	36 x 144	4.410	158.8
ss 420 sheet	42 x 120	4.410	154.4
ss 420 sheet	48 x 96	4.410	141.1
ss 420 sheet	48 x 120	4.410	176.4
ss 420 sheet	48 x 144	4.410	211.7
ss 420 sheet	60 x 96	4.410	176.4
ss 420 sheet	60 x 120	4.410	220.5
ss 420 sheet	60 x 144	4.410	264.6
ss 420 sheet	72 x 120*	4.410	264.6
ss 420 sheet	72 x 144	4.410	317.5
	13 Ga (.090")
ss 420 sheet	36 x 96	3.780	90.72
ss 420 sheet	36 x 120	3.780	113.4
ss 420 sheet	48 x 120	3.780	151.2
	14 Ga. (.075")
ss 420 sheet	30 x 120	3.150	78.75
ss 420 sheet	36 x 96	3.150	75.60
ss 420 sheet	36 x 120	3.150	94.50
ss 420 sheet	36 x 144	3.150	113.4
ss 420 sheet	42 x 120	3.150	110.3
ss 420 sheet	42 x 144	3.150	132.3
ss 420 sheet	48 x 96	3.150	100.8
ss 420 sheet	48 x 120	3.150	126.0
ss 420 sheet	48 x 144	3.150	151.2
ss 420 sheet	60 x 120	3.150	157.5
ss 420 sheet	60 x 144	3.150	189.0
ss 420 sheet	72 x 120	3.150	189.0
ss 420 sheet	72 x 144	3.150	226.8
	16 Ga. (.060")
ss 420 sheet	30 x 96	2.520	50.40
ss 420 sheet	30 x 120	2.520	63.00
ss 420 sheet	36 x 96	2.520	60.48
ss 420 sheet	36 x 120	2.520	75.60
ss 420 sheet	36 x 144	2.520	90.72
ss 420 sheet	42 x 120	2.520	88.20
ss 420 sheet	48 x 96	2.520	80.64
ss 420 sheet	48 x 120	2.520	100.8
ss 420 sheet	48 x 144	2.520	121.0
ss 420 sheet	60 x 96	2.520	100.8
ss 420 sheet	60 x 120	2.520	126.0
ss 420 sheet	60 x 144	2.520	151.2
	18 Ga. (.048")
ss 420 sheet	30 x 96	2.016	40.32
ss 420 sheet	30 x 120	2.016	50.40
ss 420 sheet	36 x 96	2.016	48.38
ss 420 sheet	36 x 120	2.016	60.48
ss 420 sheet	36 x 144	2.016	72.58
ss 420 sheet	42 x 120	2.016	70.56
ss 420 sheet	48 x 96	2.016	64.51
ss 420 sheet	48 x 120	2.016	80.64
ss 420 sheet	48 x 144	2.016	96.77
ss 420 sheet	60 x 120	2.016	100.8
ss 420 sheet	60 x 144	2.016	121.0
	19 Ga. (.042")
ss 420 sheet	36 x 120	1.764	52.92
	20 Ga. (.036")
ss 420 sheet	30 x 96	1.512	30.24
ss 420 sheet	30 x 120	1.512	37.80
ss 420 sheet	36 x 96	1.512	36.29
ss 420 sheet	36 x 120	1.512	45.36
ss 420 sheet	36 x 144	1.512	54.43
ss 420 sheet	42 x 120	1.512	52.92
ss 420 sheet	48 x 96	1.512	48.38
ss 420 sheet	48 x 120	1.512	60.48
ss 420 sheet	48 x 144	1.512	72.58
	22 Ga. (.030")
ss 420 sheet	30 x 96	1.260	25.20
ss 420 sheet	30 x 120	1.260	61.50
ss 420 sheet	36 x 96	1.260	30.24
ss 420 sheet	36 x 120	1.260	37.80
ss 420 sheet	36 x 144	1.260	45.36
ss 420 sheet	48 x 96	1.260	40.32
ss 420 sheet	48 x 120	1.260	50.40
	24 Ga. (.024")
ss 420 sheet	30 x 96	1.008	20.16
ss 420 sheet	30 x 120	1.008	25.20
ss 420 sheet	36 x 96	1.008	24.19
ss 420 sheet	36 x 120	1.008	30.24
ss 420 sheet	48 x 96	1.008	32.26
ss 420 sheet	48 x 120	1.008	40.32
	26 Ga. (.018")
ss 420 sheet	30 x 96	.7560	15.12
ss 420 sheet	30 x 120	.7560	18.90
ss 420 sheet	36 x 96	.7560	18.14
ss 420 sheet	36 x 120	.7560	22.68
ss 420 sheet	48 x 96	.7560	24.1
ss 420 sheet	48 x 120	.7560	30.24
	28 Ga. (.015")
ss 420 sheet	36 x 96	.630	15.12
ss 420 sheet	36 x 120	.630	18.90

Type 420 – Flattened | Long way of diamond runs parallel to length of sheet

	Style Designation	Size in Inches	Wt. per Sq. Ft. in Lbs.	Wt. Per Sheet
Expanded SS 420 Sheets	3/4__9	48 x 96	1.95	62.4
Expanded SS 420 Sheets	1/2__13	48 x 96	1.78	56.9
Expanded SS 420 Sheets	1/2__16	48 x 96	0.86	27.5
Expanded SS 420 Sheets	1/2__18	48 x 96	0.69	22.1
Expanded SS 420 Sheets	1-1/2__9	48 x 96	1.31	41.9
Expanded SS 420 Sheets	3/4__13	48 x 96	0.86	27.5
Expanded SS 420 Sheets	3/4__16	48 x 96	0.57	18.2
Expanded SS 420 Sheets	3/4__18	48 x 96	0.46	14.7
Expanded SS 420 Sheets	1-1/2__13	48 x 96	0.65	20.8

SS 420 Plate Weight per Unit

Stainless Steel 420 Plate Weight per Unit, Stainless Steel 420 Sheet Weight & Density

Thickness	Plate Weight per Unit Area	Density
3/16 inches	0.06000 lbs/in²42.184176 kg/m²	0.315 lbs/in³8.72 g/cm³
1/4 inches	0.08 lbs/in²56.245568 kg/m²	0.315 lbs/in³8.72 g/cm³
3/8 inches	0.121 lbs/in²85.0714216 kg/m²	0.315 lbs/in³8.72 g/cm³
1/2 inches	0.161 lbs/in²113.1942056 kg/m²	0.315 lbs/in³8.72 g/cm³
5/8 inches	0.196 lbs/in²137.8016416 kg/m²	0.315 lbs/in³8.72 g/cm³
3/4 inches	0.235 lbs/in²165.221356 kg/m²	0.315 lbs/in³8.72 g/cm³
7/8 inches	0.274 lbs/in²192.6410704 kg/m²	0.315 lbs/in³8.72 g/cm³
1 inches	0.313 lbs/in²220.0607848 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/4 inches	0.391 lbs/in²274.9002136 kg/m²	0.315 lbs/in³8.72 g/cm³
1 1/2 inches	0.47 lbs/in²330.442712 kg/m²	0.315 lbs/in³8.72 g/cm³
1 3/4 inches	0.549 lbs/in²385.9852104 kg/m²	0.315 lbs/in³8.72 g/cm³
2 inches	0.627 lbs/in²440.8246392 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/4 inches	0.705 lbs/in²495.664068 kg/m²	0.315 lbs/in³8.72 g/cm³
2 1/2 inches	0.784 lbs/in²551.2065664 kg/m²	0.315 lbs/in³8.72 g/cm³
2 3/4 inches	0.862 lbs/in²606.0459952 kg/m²	0.315 lbs/in³8.72 g/cm³
3 inches	0.941 lbs/in²661.5884936 kg/m²	0.315 lbs/in³8.72 g/cm³

SS UNS S42000 Plate Sizes

Thickness (in)	Thickness (mm)	Max Width (in)	Max Width (mm)	Weight (Lbs per Feet)	Weight (Kilos per m2)
0.015	0.381	24	609.6	0.6048	2.9532
0.018	0.4572	24	609.6	0.7258	3.5441
0.022	0.5588	24	609.6	0.887	4.3312
0.028	0.7112	24	609.6	1.129	5.5129
0.032	0.8128	24	609.6	1.2902	6.3
0.042	1.0668	24	609.6	1.6934	8.2689
0.05	1.27	24	609.6	2.016	9.8441
0.062	1.5748	24	609.6	2.4998	12.2065
0.077	1.9558	24	609.6	3.1046	15.1598
0.094	2.3876	24	609.6	3.7901	18.5071

stainless steel 420 sheet , Plate & Coil Thickness

0.6 mm	0.8 mm
1.0 mm	1.2 mm
1.5 mm	1.6 mm
1.8 mm	2.0 mm
3.0 mm	4.0 mm
5.0 mm	6.0 mm
8.0 mm	10.0 mm
12.0 mm	15.0 mm
20.0 mm	25.4 mm

SS 420 Sheet & Foil Thickness

Thickness (in mm)
0.004, Temper: As rolled	0.2, Temper: Annealed
0.005, Temper: As rolled	0.2, Temper: Half hard
0.0065, Temper: As rolled	0.25, Temper: Annealed
0.0076, Temper: As rolled	0.25, Temper: Half hard
0.01, Temper: As rolled	0.30, Coil width: 15.5, Temper: Half hard
0.02, Temper: As rolled	0.38, Temper: Annealed
0.02, Temper: Half hard	0.5, Temper: Half hard
0.025, Temper: As rolled, Condition: Surface oxide	0.75, Temper: Half hard
0.025, Temper: As rolled	1.0, Temper: Annealed
0.05, Temper: Half hard	2.0, Temper: 1/4 Hard
0.05, Temper: Quarter hard	2.0, Temper: Half hard
0.075, Temper: Half hard	3.0, Temper: Annealed
0.1, Temper: Half hard	3.0, Temper: 1/4 Hard
0.1, Coil width: 10, Temper: Half hard	6.35, Temper: Hard
0.125, Temper: Half hard	0.15, Coil width: 0.3, Temper: Half hard
0.15, Temper: Half hard

420 Stainless Steel Sheet Gauges

The following chart lists the approximate decimal equivalents for sheet metal gauges along with standard tolerances. Please note that industry standard permits deviations from nominal thicknesses.

	NOMINAL DECIMAL	STANDARD VARIANCE FROM
SHEET METAL GAUGE	(APPROXIMATE INCHES)	NOMINAL DECIMAL (+/- INCHES)
7	0.1793	0.0080
8	0.1644	0.0080
9	0.1495	0.0080
10	0.1345	0.0070
11	0.1196	0.0050
12	0.1046	0.0050
13	0.0897	0.0050
14	0.0747	0.0040
15	0.0673	0.0040
16	0.0598	0.0030
17	0.0538	0.0030
18	0.0478	0.0030
19	0.0418	0.0030
20	0.0359	0.0030
21	0.0329	0.0025
22	0.0299	0.0020
23	0.0269	0.0020
24	0.0239	0.0020
25	0.0209	0.0015
26	0.0179	0.0015
28	0.0149	0.0010

420 Cold Rolled Stainless Sheet Tolerance

420Cold Rolled Stainless Sheet
Thickness		Tolerance Specified Width
Equal To	Less Than	≤ 1000	1000< thru ≤ 1300	1300 < thru ≤ 2100
.30mm	.50mm	±.04mm	–	–
.50mm	.60mm	±.045mm	±.05mm	–
.60mm	.80mm	±.05mm	±.05mm	–
.80mm	1mm	±.055mm	±.06mm	±.06mm
1mm	1.2mm	±.06mm	±.07mm	±.07mm
1.2mm	1.5mm	±.07mm	±.08mm	±.08mm
1.5mm	2.0mm	±.08mm	±.09mm	±.10mm
2.0mm	2.5mm	±.09mm	±.10mm	±.11mm
2.5mm	3mm	±.11mm	±.12mm	±.12mm
3mm	4mm	±.13mm	±.14mm	±.14mm
4mm	5mm	±.14mm	±.15mm	±.15mm
5mm	6.5mm	±.15mm	±.15mm	±.16mm
6.5mm	8mm	±.16mm	±.17mm	±.17mm

Difference Between Stainless Steel 420 Sheet, Plate & Foil

diffrence

If thickness greater than 0.15 mm and less than 6.35mm is called a ASTM A240 Grade 420 Sheet.
If thickness greater than 6.35 mm is called a SA 240 type 420 Plate.
If thickness less than 0.15mm is then its a ASTM A240 Type 420 Foil.

420 Stainless Steel Sheet for Sale

0.2 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
0.3 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
0.4 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
0.8 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
1 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
1.65 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
2.11 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
3.1 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
04 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
05 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
06 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
08 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
10 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
12 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
15 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
16 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
18 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
20 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
22 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
25 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
28 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
30 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
32 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
35 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
36 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
38 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
40 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
42 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
45 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
50 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
52 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
60 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
62 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
65 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
70 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
80 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
90 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
100 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
110 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets
120 MM THICKNESS x WIDTH 1000 / 1250 / 1500 / 2000 / 2500 MM X LENGTH 1000 / 2500 / 3000 / 6000 MM / CUT TO SIZE in ASTM A240 AISI 420 Stainless Steel Sheet, SS 420 Sheets

ASME SA240 Stainless Steel 420 Plate Chemical Composition

Grade		C	Mn	Si	P	S	Cr
420	min. max.	0.15 -	- 1	- 1	- 0.040	- 0.03	12.0 14.0

Stainless Steel 420 Plate mechanical properties

The mechanical properties of grade 420 Stainless Steel Sheet are displayed in the following table.

Tempering Temperature (°C)	Tensile Strength (MPa)	Yield Strength 0.2% Proof (MPa)	Elongation (% in 50mm)	Hardness Brinell (HB)	Impact Charpy V (J)
Annealed *	655	345	25	241 max	-
204	1600	1360	12	444	20
316	1580	1365	14	444	19
427	1620	1420	10	461	#
538	1305	1095	15	375	#
593	1035	810	18	302	22
650	895	680	20	262	42
* Annealed tensile properties are typical for Condition A of ASTM A276; annealed hardness is the specified maximum. # Tempering of this steel should be avoided in the range 425-600°C

Stainless Steel 420 Plate Equivalent

Grade	UNS No	Old British		Euronorm		Swedish SS	Japanese JIS
Grade	UNS No	BS	En	No	Name	Swedish SS	Japanese JIS
420	S42000	420S37	56C	1.4021	X20Cr13	2303	SUS 420J1

Stainless Steel 420 Plate Other Related Speicifcation

Possible alternative grades to grade 420 stainless steels are given in table

Grade	Reasons for choosing grade 420
410	Only a lower hardened strength is needed.
416	High machinability is required, and the lower hardened strength and lower corrosion resistance of 416 is acceptable.
440C	A higher hardened strength or hardness than can be obtained from 420 is needed.
"Specials"	Variations of 420 are available to special order. These offer higher hardness, corrosion resistance and machinability for particular applications.

Physical Properties Of 420 Stainless Steel Sheet:

Grade	Density (kg/m3)	Elastic Modulus (GPa)	Mean Coefficient of Thermal Expansion (μm/m/°C)			Thermal Conductivity (W/m.K)		Specific Heat 0-100°C (J/kg.K)	Electrical Resistivity (nΩ.m)
			0-100°C	0-315°C	0-538°C	at 100°C	at 500°C
420	7800	200	10.3	10.8	11.7	24.9	-	460	550

Stainless Steel 420 Plate Processing

Stainless Steel 420 Plate Processing Options
2 Plasma Cutting Tables	Stainless Steel 420 plate can be plasma cut from 3/16″ thick thru 6.25″ thick.
4 Dynamic Waterjet Tables	Stainless Steel 420 plate can be waterjet cut from light gauge sheet metal thru 8″ thick Stainless 420 Plate.
4 Kasto Plate Saws	Stainless Steel 420 plate or bar from 1/2″ thick thru 22″ thick Stainless Steel 420 can be Kasto saw cut.
1 plate laser	Stainless Steel 420 sheet gauges thru 1-1/8″ thick Stainless Steel 420 plate can be laser cut.
3 Plate Shears	Stainless Steel 420 plate thru 3/4″ thick can be shear cut to size.
Gauer Processing	Stainless Steel 420 sheared and edged bar can be gauer processed from 3/16″ thick thru 5/8″ thick up to 8″ wide.
Machine Cutting	Stainless Steel 420 rings and discs can be machine cut from 1/2″ thick thru 12″ thick, up to 42″ in diameter
Stainless 420 Plate Leveling	In house plate leveling of coil from 13 gauge stainless sheet thru 3/8″ Stainless 420 Plate coil, thru 78.75″ wide (2 meter)

Wholesaler of 420 SS Chequered Plate, SS Werkstoff No 1.4021 Perforated Sheet, Buy 420 Stainless Steel Hot Rolled Plate, ASME SA240 Stainless Steel 420 2B Plate at dealer price

SS 420 Sheet Application Industries

Pharmaceutical equipment Chemical process vessels Automotive Industry Conveyors Marine Architectural Heat exchangers Food Processing and handling

Stainless Steel 420 Sheet Application

Stainless Steel 420 Sheets Used in Needle valves
DIN / WS 1.4021 Sheets Used in Architectural applications
AISI 420 Stainless Steel Sheet Used in Expansion joints
SS Type 420 Sheets Used in Welding filler wire and electrodes
AMS 5506 Sheet Used in Shear blades
DIN / WS 1.3541 Sheets Used in Cutlery
SS Type 420 Sheets Used in Surgical equipment
AMS 5506 Sheet Used in Spiral Welded tube for burner pipes and flues
Ams 5506 Steel Sheet Used in Gas turbines
AISI 420 Stainless Steel Sheet Used in Heat Exchangers
AISI 420 Stainless Steel Sheet Used in Heat Treatment baskets and jigs

Stainless Steel 420 Plate Value Added Services

Material Testing:

Hardness Test
Intergranular Corrosion (IGC) Test
Chemical Analysis – Spectro Analysis
Positive Material Identification – PMI Testing
Flaring Test
Micro and MacroTest
Flattening Test
Mechanical Testing Such as Tensile of Area
Pitting Resistance Test

Documentation & Packaging:

Test Certificates certifying NACE MR0103, NACE MR0175
Quality Assurance Plan (QAP)
Packing List including Complete Details
Material Traceability Records
Heat Treatment Charts
Guarantee Letter
NABL approved Laboratory Test Reports
Material Test Certificates (MTC) as per EN 10204 3.1 and EN 10204 3.2
Commercial Invoice including HS Code

Stainless Steel 420 Plate Inventory

420 SS Coils
ASTM A240 420 Stainless Steel Hot Rolled Plates
ASTM A240 420 Stainless Steel Cold Rolled Plates
420 Stainless Steel Hot Rolled Plates
420 Stainless Steel Polished Plates
420 Stainless Steel Coils
420 Stainless Steel Cold Rolled Plates
420 SS Foils
SS UNS S42000 Coils
SS UNS S42000 Strips
SS WERKSTOFF NR. 1.4021 Cold Rolled Plates
SS 420 Coils
SS WERKSTOFF NR. 1.4021 Coils
SS UNS S42000 Hot Rolled Plates
SS WERKSTOFF NR. 1.4021 Hot Rolled Plates
SS 420 Hot Rolled Plates
420 Stainless Steel Strips
SS WERKSTOFF NR. 1.4021 Strips
420 SS Cold Rolled Plates
A240 420 Stainless Steel Coils
SS 420 Foils
ASME SA240 420 Polished Plates
420 SS Strips
SS 420 Cold Rolled Plates
ASME SA240 420 Stainless Steel Strips
SS WERKSTOFF NR. 1.4021 Polished Plates
420 SS Hot Rolled Plates
SS UNS S42000 Polished Plates
SS UNS S42000 Cold Rolled Plates
SS 420 Strips

ASTM A240 Stainless Steel 420 Foils
420 SS Shim Sheet
SS 420 Shim Sheet
420 SS Perforated Sheet
ASTM A240 Stainless Steel 420 Circle
SS 420 Perforated Sheet
SS 420 Polished Plates
420 SS Chequered Plate
SS WERKSTOFF NR. 1.4021 Chequered Plate
ASTM A240 420 Stainless Steel Shim Sheet
SS UNS S42000 Circle
420 Stainless Steel Foils
ASTM A240 Stainless Steel 420 Perforated Sheet
SS UNS S42000 Shim Sheet
SS 420 Chequered Plate
420 Stainless Steel Chequered Plate
420 SS Circle
SS UNS S42000 Perforated Sheet
SS UNS S42000 Foils
SS 420 Circle
SS WERKSTOFF NR. 1.4021 Perforated Sheet
420 Stainless Steel Shim Sheet
420 Stainless Steel Perforated Sheet
SS WERKSTOFF NR. 1.4021 Circle
420 SS Polished Plates
SS UNS S42000 Chequered Plate
SS WERKSTOFF NR. 1.4021 Foils
420 Stainless Steel Circle
SS WERKSTOFF NR. 1.4021 Shim Sheet
Stainless Steel 420 Chequered Plate

Stainless Steel 304L Plate

Stainless Steel 420 Sheet

Cut to size AISI 420 plate, UNS S42000 coil Stock, buy from stainless steel 420 plate, 1.4021 Strip suppliers, AMS 5506 Sheet, 420 grade stainless steel sheet manufacturers in India

Stainless Steel 420 Sheet

AISI 420 Plate

UNS S42000 Coil

Special price for 420 ss sheet metal, ss 420 plate, Oldest 420 stainless steel sheet suppliers, Stockist of Stainless steel uns s42000 Foil, 420 stainless steel strip, dealer of ss 420 coil.

420 stainless steel sheet for sale, Contact us today for Stainless Steel 420 Cold Rolled Plate, stainless steel 420 coils, stockholder of ss 420 sheet, SUS 420 Circle

Wholesaler of 420 SS Chequered Plate, SS Werkstoff No 1.4021 Perforated Sheet, Buy 420 Stainless Steel Hot Rolled Plate, ASME SA240 Stainless Steel 420 2B Plate at dealer price

Hot sale of ASTM A240 Stainless Steel 420 Shim Sheet, traders of SS Grade 420 Polished Plate, aisi 420 stainless steel Slitting Coil in mumbai, india