The ss 317l seamless pipe stainless Steel 317L's high-temperature resistance is typically expressed by its creep strength (the capacity of the substance to withstand distortion during long term exposure at higher temperatures).
About the Strength of ss 317l seamless pipe and tubes
The low carbon variants of the 317l stainless steel tubing have limited resistance at higher temperatures. Frequently they are not used at higher temperatures in structural applications. In such uses, ASTM A312 TP 317L SS round pipe has outstanding carbon quality, with slightly reduced crack strengths.
Resistance traits
Stainless Steel 317L Pipe has excellent resistance to oxidation owing to its better chromium quality. Also, it can be easily broken if the temperatures go higher than around 350 degrees C and therefore prohibited to some specific applications.
Some excellent properties of Stainless Steel 317L Pipe
The 317L SS Welded Pipe has a similar high strength plus resistance to corrosion as 317 steel but can be shaped with extra stronger welds due to the inferior carbon content. For the machining, Stainless Steel 317L ERW Pipe demands low speeds and the right temperature to reduce its possibilities to work worse.
Forms of 317L Stainless Steel available in the market
ASTM Specification | ASTM A/ASME SA213/A249/A269/A312/A358 CL. I to V ASTM A789/A790 |
---|---|
Standard | ASTM, ASME, JIS, AISI, AMS, EN, SAE, DIN, NF, TOCT, DS, DTD, GB |
DIN 1.4438 SS 317L Pipe Size | 4 to 219mm W. T.: 0.5 to 20mm |
astm a312 tp317L EFW Pipe size | 5.0 - 1219.2 mm |
SS 317L Welded Pipe Size | 5.0 - 1219.2 mm |
Swg & Bwg | 10 Swg., 12 Swg., 14 Swg., 16 Swg., 18 Swg., 20 Swg. |
317L Stainless Steel Pipe Length | Single Random, Double Random, Standard & Cut length Pipe |
stainless steel astm a312 tp317L Pipe Schedule | SCH5, SCH10, SCH10S, SCH20, SCH30, SCH40, SCH40S, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS |
Form | 317L Stainless Steel Pipe are available in form of Round, Square, Hollow, Rectangular, Hydraulic, Coiled, Straight Pipes, “U” Shape, Pan Cake Coils etc. |
Finish | Polished, AP (Annealed & Pickled), BA (Bright & Annealed), MF, NO.1, NO.4, 2B, BA, HL, 8K, Mirror finish, etc |
317L Stainless Steel Pipe End | Plain End, Beveled End, Treaded Pipe, Screwed ends |
Type of 317L SS Pipe | Seamless / ERW/ EFW / Welded / Fabricated / CDW / DOM / CEW 317L Stainless Steel Pipe |
Application of 317L Stainless Steel Pipe | Dairy Pipe, Oil Pipe, Gas Pipe, Fluid Pipe, Boiler Pipe for Chemical Industry |
Marking on ASTM A249 TP 317L Stainless Steel Pipe | All 317L Stainless Steel Pipes are marked as follows: Standard, Grade, OD, Thickness, Length, Heat No. (Or according to the customer’s request.) |
Value Added Service | Draw & Expansion as per required Size & Length, Polish (Electro & Commercial) Annealed & Pickled Bending, Machining Etc. |
Specialize in | Large Diameter 317L Stainless Steel Pipe |
Typical Manufacturing Specifications in Stainless Steel |
|
Our stockyard | Thiruvananthapuram, Chennai, Hyderabad, Bengaluru, Tirunelveli, Bhubaneswar, Ahmedabad, Mumbai, Shivamogga, Agra, Noida, Tiruchirappalli, Dhanbad, Pimpri-Chinchwad, Pune, Coimbatore, Navi Mumbai |
317L Stainless Steel Pipe manufacturing Technique | Cold drawn, hot drawn, bright annealed, solid solution, hot extruding |
317L Stainless Steel Pipe Test Certificate | Manufacturer Test Certificate Laboratory Test Certificate from Govt. Approved Lab. Under Third Party Inspection |
Material Test Certificates (MTC) | Material Test Certificates (MTC) as per EN 10204/3.1B, EN 10204 3.1 and EN 10204 3.2, 100% Radiography Test Report, Heat Treatment Charts, Raw Materials Certificate, Third Party Inspection Report, Fumigation Certificates, 317L Stainless Steel Pipe HS Code Commercial Invoice, Form A for Generalized System of Preferences (GSP) |
Manufacturers of 317L Stainless Steel Pipe |
|
We can also cut, thread, and groove 317L SS Pipe to meet your specifications. 317L Stainless Steel Pipe Dimension ANSI/ ASME B36.10, B36.19, B2.1 |
WELDED PRODUCT |
SEAMLESS PRODUCT |
MPS: 1/8" through 24"
|
NPS: 1/8" through 12"
|
Schedules: 5, 10, 10S, 20, 30, 40, 40S, 80, 80S
|
Schedules: 5, 10, 40, 80, 160, XXH
|
Specifications: ASTM A312, ASME SA312 |
Specifications: ASTM A312,ASME SA312 |
Corrosion tested to MIL-P-24691/3 or A262 Practice E
Price of 317L Stainless Steel Pipe manufacturer in India | 317L Stainless Steel Pipe Price in India (INR) | 317L Stainless Steel Pipe Price in UK Pound sterling | 317L SS Pipe Price in UAE Dirham |
---|---|---|---|
SS 317L Seamless Tube ASTM A312 TP 317L | INR 826568.25 | 11500 UK Pound sterling | 42231.56 UAE Dirham |
SS 317L ERW/Welded Tube ASTM A312 TP 317L | INR 646879.50 | 9000 UK Pound sterling | 33050.78 UAE Dirham |
SS 317L EFW Tube ASTM A358 TP 317 | INR 632504.40 | 8800 UK Pound sterling | 32316.32 UAE Dirham |
Pipe Size (NPS) |
SS Grade |
Pipes Types |
Price in USD |
15 NB |
SCH 10 |
15 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
7.02 |
15 NB |
SCH 40 |
15 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
7.02 |
15 NB |
SCH 80 |
15 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
7.02 |
15 NB |
SCH 160 |
15 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
7.24 |
15 NB |
SCH XXS |
15 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
20 NB |
SCH 10 |
20 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.70 |
20 NB |
SCH 40 |
20 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.70 |
20 NB |
SCH 80 |
20 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.70 |
20 NB |
SCH 160 |
20 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.70 |
20 NB |
SCH XXS |
20 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
25 NB |
SCH 10 |
25 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.17 |
25 NB |
SCH 40 |
25 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.17 |
25 NB |
SCH 80 |
25 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.17 |
25 NB |
SCH 160 |
25 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.17 |
25 NB |
SCH XXS |
25 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
32 NB |
SCH 10 |
32 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.01 |
32 NB |
SCH 40 |
32 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.01 |
32 NB |
SCH 80 |
32 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.01 |
32 NB |
SCH 160 |
32 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.23 |
40 NB |
SCH 10 |
40 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.01 |
40 NB |
SCH 40 |
40 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.01 |
40 NB |
SCH 80 |
40 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.01 |
40 NB |
SCH 160 |
40 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.17 |
40 NB |
SCH XXS |
40 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
50 NB |
SCH 10 |
50 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.01 |
50 NB |
SCH 40 |
50 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.01 |
50 NB |
SCH 80 |
50 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.01 |
50 NB |
SCH 160 |
50 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.17 |
50 NB |
SCH XXS |
50 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
65 NB |
SCH 10 |
65 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.01 |
65 NB |
SCH 40 |
65 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.01 |
65 NB |
SCH 80 |
65 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.01 |
65 NB |
SCH 160 |
65 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.17 |
65 NB |
SCH XXS |
65 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
80 NB |
SCH 10 |
80 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.28 |
80 NB |
SCH 40 |
80 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.17 |
80 NB |
SCH 80 |
80 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.17 |
80 NB |
SCH 160 |
80 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.44 |
80 NB |
SCH XXS |
80 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
90 NB |
SCH 10 |
90 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.39 |
90 NB |
SCH 40 |
90 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.39 |
90 NB |
SCH 80 |
90 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.39 |
100 NB |
SCH 10 |
100 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.39 |
100 NB |
SCH 40 |
100 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.39 |
100 NB |
SCH 80 |
100 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.39 |
100 NB |
SCH 120 |
100 NB SCH 120 ASTM A312 TP 317L Seamless Pipes |
6.65 |
100 NB |
SCH 160 |
100 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.65 |
100 NB |
SCH XXS |
100 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
125 NB |
SCH 10 |
125 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.81 |
125 NB |
SCH 40 |
125 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.81 |
125 NB |
SCH 80 |
125 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.81 |
125 NB |
SCH 160 |
125 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.81 |
125 NB |
SCH XXS |
125 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
150 NB |
SCH 10 |
150 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
6.92 |
150 NB |
SCH 40 |
150 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
6.92 |
150 NB |
SCH 80 |
150 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
6.92 |
150 NB |
SCH 120 |
150 NB SCH 120 ASTM A312 TP 317L Seamless Pipes |
6.92 |
150 NB |
SCH 160 |
150 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
6.92 |
150 NB |
SCH XXS |
150 NB SCH XXS ASTM A312 TP 317L Seamless Pipes |
– |
200 NB |
SCH 10 |
200 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
7.45 |
200 NB |
SCH 20 |
200 NB SCH 20 ASTM A312 TP 317L Seamless Pipes |
7.02 |
200 NB |
SCH 40 |
200 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
7.02 |
200 NB |
SCH 80 |
200 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
7.02 |
200 NB |
SCH 160 |
200 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
– |
250 NB |
SCH 10 |
250 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
8.30 |
250 NB |
SCH 20 |
250 NB SCH 20 ASTM A312 TP 317L Seamless Pipes |
8.19 |
250 NB |
SCH 30 |
250 NB SCH 30 ASTM A312 TP 317L Seamless Pipes |
8.19 |
250 NB |
SCH 40 |
250 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
8.19 |
250 NB |
SCH XS |
250 NB SCH XS ASTM A312 TP 317L Seamless Pipes |
8.19 |
250 NB |
SCH 80 |
250 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
8.51 |
250 NB |
SCH 160 |
250 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
– |
300 NB |
SCH 10 |
300 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
8.83 |
300 NB |
SCH 20 |
300 NB SCH 20 ASTM A312 TP 317L Seamless Pipes |
8.51 |
300 NB |
SCH 30 |
300 NB SCH 30 ASTM A312 TP 317L Seamless Pipes |
– |
300 NB |
SCH STD |
300 NB SCH STD ASTM A312 TP 317L Seamless Pipes |
8.51 |
300 NB |
SCH 40 |
300 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
8.51 |
300 NB |
SCH XS |
300 NB SCH XS ASTM A312 TP 317L Seamless Pipes |
– |
300 NB |
SCH 80 |
300 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
– |
300 NB |
SCH 160 |
300 NB SCH 160 ASTM A312 TP 317L Seamless Pipes |
– |
350 NB |
SCH 10 |
350 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
– |
350 NB |
SCH 20 |
350 NB SCH 20 ASTM A312 TP 317L Seamless Pipes |
– |
350 NB |
SCH 9.5 |
350 NB SCH 9.5 ASTM A312 TP 317L Seamless Pipes |
– |
350 NB |
SCH 40 |
350 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
– |
400 NB |
SCH 10 |
400 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
– |
400 NB |
SCH 20 |
400 NB SCH 20 ASTM A312 TP 317L Seamless Pipes |
– |
400 NB |
SCH 30 |
400 NB SCH 30 ASTM A312 TP 317L Seamless Pipes |
– |
400 NB |
SCH 40 |
400 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
– |
400 NB |
SCH 80 |
400 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
– |
450 NB |
SCH 10 |
450 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
– |
450 NB |
SCH 20 |
450 NB SCH 20 ASTM A312 TP 317L Seamless Pipes |
– |
450 NB |
SCH STD |
450 NB SCH STD ASTM A312 TP 317L Seamless Pipes |
– |
450 NB |
SCH 40 |
450 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
– |
450 NB |
SCH XS |
450 NB SCH XS ASTM A312 TP 317L Seamless Pipes |
– |
500 NB |
SCH 10 |
500 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
– |
500 NB |
SCH 20 |
500 NB SCH 20 ASTM A312 TP 317L Seamless Pipes |
– |
500 NB |
SCH 30 |
500 NB SCH 30 ASTM A312 TP 317L Seamless Pipes |
– |
500 NB |
SCH 40 |
500 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
– |
500 NB |
SCH 80 |
500 NB SCH 80 ASTM A312 TP 317L Seamless Pipes |
– |
550 NB |
SCH STD |
550 NB SCH STD ASTM A312 TP 317L Seamless Pipes |
– |
550 NB |
SCH 30 |
550 NB SCH 30 ASTM A312 TP 317L Seamless Pipes |
– |
600 NB |
SCH 10 |
600 NB SCH 10 ASTM A312 TP 317L Seamless Pipes |
– |
600 NB |
SCH 20 |
600 NB SCH 20 ASTM A312 TP 317L Seamless Pipes |
– |
600 NB |
SCH XS |
600 NB SCH XS ASTM A312 TP 317L Seamless Pipes |
– |
600 NB |
SCH 40 |
600 NB SCH 40 ASTM A312 TP 317L Seamless Pipes |
– |
The austenitic Stainless Steel 317l ss tubing is quite robust in this regard. Due to its excellent corrosion resistance, it has been used in handling many of the chemicals used by the chemical process industries.
28 |
.028" Thick |
035 |
.035" Thick |
039 |
.039" Thick |
049 |
.049" Thick |
065 |
.065" Thick |
083 |
.083" Thick |
109 |
.109" Thick |
Stainless Steel 317L Pipe OD | ASTM A312 TP317L Pipe Tolerance |
---|---|
4 to 35mm | +/- 0.08mm |
35 to 38mm | +/- 0.15mm |
38 to 60mm | +/- 0.20mm |
60 and above | +/- 0.25mm |
Surface Finish | Internal Surface(ID) | Exterbal Surface(OD) | |||
Roughness Average(RA) | Roughness Average(RA) | ||||
μ inch | μm | μ inch | μm | ||
AP | Annealed & Pickled | Not defined | Not defined | 40 or Not defined | 1.0 or Not defined |
BA | Beight Annealed | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
MP | Mechanical Polish | 40,32,25,20 | 1.0,0.8,0.6,0.5 | 32 | 0.8 |
EP | Electro Polish | 15,10,7,5 | 0.38,0.25,0.20;0.13 | 32 | 0.8 |
1/8" IPS(.405"O. D.) | 3 1/2" IPS( 4.000"O. D.) |
---|---|
SCH 40, 80 | SCH 10, 40, 80, 160, XXH |
1/4" IPS(.540"O. D.) | 4" IPS(4.500"O. D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
3/8" IPS(.675"O. D.) | 5" IPS( 5.563"O. D.) |
SCH 10, 40, 80 | SCH 10, 40, 80, 160, XXH |
1/2" IPS(.840"O. D.) | 6" IPS(6.625"O. D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
3/4" IPS(1.050"O. D.) | 8 ” IPS(8.625"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH 5, 10, 40, 80, 120, 160, XXH |
1" IPS:(1.315′O. D.) | 10" IPS(10.750"O. D.) |
SCH 5, 10, 40, 80, 160, XXH | SCH 10, 20, 40, 80 (.500), TRUE 80(.500) |
1-1/4" IPS(1.660"O. D.) | 12" IPS(12.750"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH 10, 20, 40(.375), TRUE40(.406), SCH80(.500) |
1-1/2" IPS(1.900"O. D.) | 14" IPS(14.000"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH10 (.188), SCH40 (.375) |
2" IPS(2.375"O. D.) | 16" IPS(16.000"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH10(.188), SCH40(.375) |
2 1/2" IPS(2.875"O. D.) | 18" IPS (18.000"O. D.) |
SCH 10, 40, 80, 160, XXH | SCH-40 (.375) |
3" IPS( 3.500"O. D.) | |
SCH 5, 10, 40, 80, 160, XXH |
Robost quality 317L Stainless Steel Pipe suppliers offer these astm a312 tp317L Pipe in a wide range of sizes, from thin wall to thick wall 317L Stainless Steel Pipe in seamless or welded forms
SS 317L food grade stainless steel Pipes are supplied according to ANSI/ ASME B36.19.
WT = 317L Stainless Steel Pipe wall thickness
OD = 317L Stainless Steel Pipe outside diameter
SS 317L Pipe OD mm |
Pipe WT mm |
in. |
Sch |
Kg/m |
---|---|---|---|---|
13.72 |
1.65 |
1/4 |
10S |
0.50 |
13.72 |
2.24 |
1/4 |
40S |
0.64 |
13.72 |
3.02 |
1/4 |
80S |
0.81 |
17.15 |
1.65 |
3/8 |
10S |
0.64 |
17.15 |
2.31 |
3/8 |
40S |
0.86 |
17.15 |
3.20 |
3/8 |
80S |
1.12 |
21.34 |
2.11 |
1/2 |
10S |
1.02 |
21.34 |
2.77 |
1/2 |
40S |
1.29 |
21.34 |
3.73 |
1/2 |
80S |
1.65 |
26.67 |
2.11 |
3/4 |
10S |
1.30 |
26.67 |
2.87 |
3/4 |
40S |
1.71 |
26.67 |
3.91 |
3/4 |
80S |
2.23 |
33.40 |
2.77 |
1 |
10S |
2.13 |
33.40 |
3.38 |
1 |
40S |
2.54 |
33.40 |
4.55 |
1 |
80S |
3.29 |
33.40 |
6.352) |
1 |
160 |
4.30 |
42.16 |
2.77 |
1¼ |
10S |
2.73 |
42.16 |
3.56 |
1¼ |
40S |
3.44 |
42.16 |
4.85 |
1¼ |
80S |
4.53 |
42.16 |
6.352) |
1¼ |
160 |
5.69 |
48.26 |
2.77 |
1½ |
10S |
3.16 |
48.26 |
3.68 |
1½ |
40S |
4.11 |
48.26 |
5.08 |
1½ |
80S |
5.49 |
60.33 |
2.77 |
2 |
10S |
3.99 |
60.33 |
3.91 |
2 |
40S |
5.52 |
60.33 |
5.54 |
2 |
80S |
7.60 |
60.33 |
8.742) |
2 |
160 |
11.29 |
73.03 |
3.05 |
2½ |
10S |
5.35 |
73.03 |
5.16 |
2½ |
40S |
8.77 |
73.03 |
7.01 |
2½ |
80S |
11.59 |
88.90 |
3.05 |
3 |
10S |
6.56 |
88.90 |
5.49 |
3 |
40S |
11.47 |
88.90 |
7.62 |
3 |
80S |
15.51 |
88.90 |
11.132) |
3 |
160 |
21.67 |
101.60 |
3.05 |
3½ |
10S |
7.53 |
101.60 |
5.74 |
3½ |
40S |
13.78 |
101.60 |
8.08 |
3½ |
80S |
18.92 |
114.30 |
3.05 |
4 |
10S |
8.50 |
114.30 |
6.02 |
4 |
40S |
16.32 |
114.30 |
8.56 |
4 |
80S |
22.67 |
114.30 |
13.492) |
4 |
160 |
34.05 |
141.30 |
6.55 |
5 |
40S |
22.10 |
141.30 |
9.53 |
5 |
80S |
31.44 |
141.30 |
15.882) |
5 |
160 |
49.87 |
168.28 |
3.4 |
6 |
10S |
14.04 |
168.28 |
7.11 |
6 |
40S |
28.69 |
168.28 |
10.97 |
6 |
80S |
43.21 |
168.28 |
14.27 |
6 |
120 |
54.75 |
168.28 |
18.262) |
6 |
160 |
68.59 |
219.08 |
8.18 |
8 |
40S |
43.20 |
219.08 |
12.7 |
8 |
80S |
65.63 |
219.08 |
18.23 |
8 |
120 |
91.30 |
219.08 |
23.012) |
8 |
160 |
112.97 |
Products Range | Size Range | Specifications | Length* | Finish |
---|---|---|---|---|
SS Seamless Instrumentation Tubes Bright Annealed & Polished | OD 6 TO 25 mm WT 0.7 to 3 mm | ASTM A/SA 213, 269 EN 10216-5 | Straight length 6 to 8 m, Coil length up to 50 m | Cold Finish |
SS Seamless Heat Exchanger & Feedwater Heater Tubes | OD 15.88 to 38.10 mm WT 0.9 to 5 mm | ASTM A/SA 213, 269, 789, EN 10216-5 | Length up to 30 m & ‘U’ Tubes 1.5 D to 2.0 m | Cold Finish |
SS Seamless Boiler Tubes | OD 38.1 to 76.10 mm WT 3 to 6mm | ASTM A/SA 213, EN 10216-5 | Length 10 to 12 m | Cold Finish |
SS Seamless Hollow Bars | OD 32 to 80 mm ID 20 to 60 mm | ASTM A 511 EN 10216-5 | Length 2.50 to 6 m subject to hollow bar size | Cold Finish |
SS Seamless Process Pipes | ½” to 6” NB Sch 10s, 40s, & 80s | ASTM A/SA 312, ASTM 790 | Single random length 5to7 m or Double random length 10-12m | Cold Finish |
Buy from PED certified 317L Stainless Steel Pipe suppliers for prime quality & low price.
Wall | Sizes ( O.D.) |
---|---|
.010 | 1/16" , 1/8" , 3/16" |
.020 | 1/16" , 1/8" , 3/16" , 1/4" , 5/16" , 3/8" |
.012 | 1/8" |
.016 | 1/8" , 3/16" |
.028 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 3/4" , 1" , 1 1/2" , 2" |
.035 | 1/8" , 3/16" , 1/4" , 5/16" , 3/8" , 7/16" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.049 | 3/16" , 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/8" , 1 1/4" , 1 1/2" , 1 5/8" , 2" , 2 1/4" |
.065 | 1/4" , 5/16" , 3/8" , 1/2" , 16" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 3/4" , 2" , 2 1/2" , 3" |
.083 | 1/4" , 3/8" , 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 1 5/8" , 1 7/8" , 2" , 2 1/2" ,3" |
.095 | 1/2" , 5/8" , 1" , 1 1/4" , 1 1/2" , 2" |
.109 | 1/2" , 3/4" , 1" , 1 1/4" , 1 1/2" , 2" |
.120 | 1/2" , 5/8" , 3/4" , 7/8" , 1" , 1 1/4" , 1 1/2" , 2" , 2 1/4" , 2 1/2" , 3" |
.125 | 3/4" , 1" , 1 1/4" , 1 1/2" , 2" , 3" , 3 1/4" |
.134 | 1" |
.250 | 3" |
.375 | 3 1/2" |
Types of 317 Stainless Steel Tube | Out diameter (OD) | Wall thickness | Length |
---|---|---|---|
NB Sizes (in stock) | 1/8” ~ 8” | SCH 5 / SCH 10 / SCH 40 / SCH 80 / SCH 160 | Upto 6 Meters |
317 Stainless Steel Seamless Tube (Custom Sizes) | 5.0mm ~ 203.2mm | As per requirement | Upto 6 Meters |
317 Stainless Steel Welded Tube (in Stock + Custom Sizes) | 5.0mm ~ 1219.2mm | 1.0 ~ 15.0 mm | Upto 6 Meters |
temperatures ranging 100oF to 750oF, Ratings for standard seamless stainless steel 317L pipes. All ratings in psig based on ANSI/ASME B 31.1.
Pressure Rating (psig) kPa | ||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|
Pipe Size (inches) |
Pipe Schedule | Outside Diameter (in) (mm) |
Wall Thickness (in) (mm) |
Temperature (oF) (deg C) | ||||||||
100 | 200 | 300 | 400 | 500 | 600 | 650 | 700 | 750 | ||||
Allowable Stress (psi) kPa | ||||||||||||
16700 | 16700 | 16700 | 15500 | 14400 | 13500 | 13200 | 12900 | 12600 | ||||
1" | 40 | 1.315 | 0.133 | 2205 | 2205 | 2205 | 2047 | 1902 | 1783 | 1743 | 1703 | 1664 |
80 | 1.315 | 0.179 | 3061 | 3061 | 3061 | 2841 | 2640 | 2475 | 2420 | 2365 | 2310 | |
160 | 1.315 | 0.250 | 4493 | 4493 | 4493 | 4170 | 3874 | 3632 | 3552 | 3471 | 3390 | |
1 1/2" | 40 | 1.900 | 0.145 | 1629 | 1629 | 1629 | 1512 | 1404 | 1317 | 1287 | 1258 | 1229 |
80 | 1.900 | 0.200 | 2303 | 2303 | 2303 | 2138 | 1986 | 1862 | 1821 | 1779 | 1738 | |
160 | 1.900 | 0.281 | 3362 | 3362 | 3362 | 3120 | 2899 | 2717 | 2657 | 2597 | 2536 | |
2" | 40 | 2.375 | 0.154 | 1371 | 1371 | 1371 | 1272 | 1182 | 1108 | 1083 | 1059 | 1034 |
80 | 2.375 | 0.218 | 1985 | 1985 | 1985 | 1843 | 1712 | 1605 | 1569 | 1534 | 1498 | |
160 | 2.375 | 0.344 | 3283 | 3283 | 3283 | 317L7 | 2831 | 2654 | 2595 | 2536 | 2477 | |
3" | 40 | 3.500 | 0.216 | 1301 | 1301 | 1301 | 1208 | 1122 | 1052 | 1028 | 1005 | 982 |
80 | 3.500 | 0.300 | 1844 | 1844 | 1844 | 1712 | 1590 | 1491 | 1458 | 1425 | 1391 | |
160 | 3.500 | 0.438 | 2787 | 2787 | 2787 | 2587 | 2403 | 2253 | 2203 | 2153 | 2103 | |
4" | 40 | 4.500 | 0.237 | 1102 | 1102 | 1102 | 1023 | 950 | 891 | 871 | 851 | 831 |
80 | 4.500 | 0.337 | 1596 | 1596 | 1596 | 1482 | 1377 | 1291 | 1262 | 1233 | 1204 | |
160 | 4.500 | 0.531 | 2611 | 2611 | 2611 | 2424 | 2552 | 2111 | 2064 | 2017 | 1970 | |
5" | 40 | 5.563 | 0.258 | 965 | 965 | 965 | 896 | 832 | 780 | 763 | 746 | 728 |
80 | 5.563 | 0.375 | 1428 | 1428 | 1428 | 1325 | 1231 | 1154 | 1129 | 1103 | 1077 | |
160 | 5.563 | 0.625 | 2474 | 2474 | 2474 | 2296 | 2133 | 2000 | 1955 | 1911 | 1866 | |
6" | 40 | 6.625 | 0.280 | 877 | 877 | 877 | 814 | 756 | 709 | 693 | 677 | 661 |
80 | 6.625 | 0.432 | 1379 | 1379 | 1379 | 1280 | 1189 | 1115 | 1090 | 1065 | 1040 | |
160 | 6.625 | 0.719 | 2382 | 2382 | 2382 | 2211 | 2054 | 1925 | 1883 | 1840 | 1797 | |
8" | 40 | 8.625 | 0.322 | 771 | 771 | 771 | 716 | 665 | 623 | 610 | 596 | 582 |
80 | 8.625 | 0.500 | 1218 | 1218 | 1218 | 1131 | 1050 | 985 | 963 | 941 | 919 | |
160 | 8.625 | 0.906 | 2298 | 2298 | 2298 | 2133 | 1982 | 1858 | 1817 | 1775 | 1734 | |
10" | 40 | 10.750 | 0.365 | 699 | 699 | 699 | 649 | 603 | 565 | 553 | 540 | 528 |
80 | 10.750 | 0.594 | 1159 | 1159 | 1159 | 1075 | 999 | 937 | 916 | 895 | 874 | |
160 | 10.750 | 1.125 | 2289 | 2289 | 2289 | 2124 | 1974 | 1850 | 1809 | 1768 | 1727 |
with the ASME 31.3 Allowable Pressure Equation with quality factor E = 0.6 and wall thickness coefficient Y = 0.4 Allowable pressure is calculated
Pipe Tube Type | NB Sizes | Sch 5 | Sch 10 | Sch 40 | Sch 80 | Sch 160 |
---|---|---|---|---|---|---|
Stainless Steel 317L Pipe | 1/8″ |
√ |
√ |
√ |
√ |
|
Stainless Steel 317L Pipe | 1/4″ |
√ |
√ |
√ |
√ |
|
Stainless Steel 317L Pipe | 3/8″ |
√ |
√ |
√ |
√ |
|
Stainless Steel 317L Pipe | 1/2″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 3/4″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 1″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 1 1/4″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 1 1/2″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 2″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 2 1/2″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 3″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 4″ |
√ |
√ |
√ |
√ |
√ |
Stainless Steel 317L Pipe | 5″ |
√ |
√ |
√ |
√ |
|
Stainless Steel 317L Pipe | 6″ |
√ |
√ |
√ |
√ |
Pipe Type | OD (in mm) | Wall Thickness (in mm) |
Stainless Steel 317L Rectangular Pipe/Tube | 10*20mm to 100*200mm | 0.5mm-30mm |
Stainless Steel 317L Capillary Tube | 0.28mm to 10mm | 0.08mm – 1.2mm |
Stainless Steel 317L Seamless Tube | 6mm to 430mm | 0.8mm – 30mm |
Stainless Steel 317L Colour Coated Pipe/Tube | 6mm to 630mm | 0.5mm-30mm |
Stainless Steel 317L Electropolished Pipes/Tubes | 12.7mm to 250mm | 0.5mm-30mm |
Stainless Steel 317L Round Pipe/Tube | 6mm – 630mm | 0.5mm-30mm |
Stainless Steel 317L Square Pipe/Tube | 12.7mm* 12.7mm to 300mm* 300mm | 0.5mm-30mm |
Stainless Steel 317L Triangle Tube | 16mm to 85mm | 0.5mm-3.0mm |
Stainless Steel 317L Hexagonal Tube | 13mm to 85mm | 0.5mm-2.0mm |
Stainless Steel 317L U Shaped Tube | 20mm to 200mm | 0.5mm-2.0mm |
317L Thin-Wall Stainless Steel Tube | 22mm*0.7mm to 108mm*2.0mm | 0.5mm-2.0mm |
317L Inner/Outside Polished Stainless Steel Tube, Pipes | 12.5mm to 203.2mm | 1.0mm – 5mm |
|
|
Grade | Tensile Strength (MPa) min | Yield Strength 0.2% Proof (MPa) min | Elongation (% in 50mm) min | Hardness | |
Rockwell B (HR B) max | Brinell (HB) max | ||||
317 | 515 | 205 | 35 | 75 | 205 |
317L | 515 | 205 | 35 | 75 | 205 |
Grade | C | Mn | Si | P | S | Cr | Mo | Ni | N | |
317 | min. | – | – | – | – | – | 18.0 | 3.0-4.0 | 11.0 | – |
max. | 0.08 | 2.0 | 1.0 | 0.040 | 0.030 | 20.0 | 14.0 | – | ||
317L | min. | – | – | – | – | – | 18.0 | 3.0-4.0 | 11.0 | – |
max. | 0.08 | 2.0 | 1.0 | 0.040 | 0.030 | 20.0 | 15.0 | – |
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
SS 317 | 1.4449 | S31700 | SUS 317 | – | – | – | – |
SS 317L | 1.4438 | S31703 | SUS 317L | – | – | – | X2CrNiMo18-15-4 |
Grade | Density (kg/m3) | Elastic Modulus (GPa) | Mean Coefficient of Thermal Expansion (m/m/0C) | Thermal Conductivity (W/m.K) | Specific Heat 0-1000C (J/kg.K) | Electrical Resistivity (n.m) | |||
0-1000C | 0-3150C | 0-5380C | at 1000C | at 5000C | |||||
317 | 8000 | 193 | 15.9 | 16.2 | 17.0 | 14.2 | 18.7 | 500 | 740 |
317L | 8000 | 193 | 15.9 | 16.2 | 17.0 | 14.2 | 18.7 | 500 | 740 |
Long Product Processing Services Overview |
|
---|---|
Production Cutting |
Bhansali Brothers can provide production cutting for product diameters up to 4″. We utilize Amanda Production Equipment to achieve these precision cuts with tight tolerances. |
Pipe Threading |
Available thru 2″ in Diameter/All schedules |
Tubular Polishing |
Products polished included all tubular products, with OD & ID polishing available, Round Bar, Square Bar, Hex & Flat bar, Angles, Uneven Leg Angles, beams, and other shapes. |
|
|
|
|
317L Stainless Steel Value Added Service |
|
---|---|
317L Stainless Steel Pipe Beveling |
Bhansali Brothers can bevel the edges of 317L Stainless Steel pipe to prepare for welding or other processes. |
Positive Material Identification (PMI) |
Bhansali Brothers can perform PMI testing in house for most 317L Stainless Steel grades, or we can work with independent labs to complete PMI in order to meet customer specifications. |
317L Stainless Steel Pipe Polishing |
Bhansali Brothers can polish nearly any 317L Stainless Steel pipe item to a #4 polish, #6 Polish, #7 polish or a #8 mirror finish. 317L Stainless Steel polished pipes can also be cut to size. |
Heatreating & Annealing |
Some grades of 317L Stainless Steel pipe can be heatreated to change the mechanical properties. |
317L Stainless Steel Pipe Honing & Turning |
Bhansali Brothers can hone pipe and tube, using a precision abrasion process in order to obtain a desired finish or close dimensional tolerance. |
UT Testing |
In some cases, UT testing of the 317L Stainless Steel plates may be required. We can assist you with this requirement. |
Documentation & Packaging: