Stainless Steel Pipe reducer

Contact For Best stainless steel eccentric pipe reducer manufacturers, Suppliers of ASME B16.9 Reducer, Concentric Reducer Type B, check stainless steel concentric reducer dimensions

Stainless steel pipe reducer is a kind of pipe fittings used in process piping that reduces the pipe size from a large bore to a smaller bore inner diameter. The length of the reduction is usually equal to the average of the larger and smaller pipe diameters. There are two main types of reducer. Concentric reducers and eccentric reducers.

Buy From ANSI B 16.9 Concentric Reducer, stainless steel reducer fittings Suppliers, Stockist of stainless steel exhaust pipe reducer, stainless steel flanged concentric reducer, Exporter of stainless steel tube reducer, view ASME B16 9 Eccentric Reducer Dimensions

A pipe reducer and attachment of pipe reducers. A pipe reducer is a major pipe fitting that is responsible for reducing the size of pipe by decreasing the inner diameter. Stainless steel reducer are in short, alter and can change the size of the paper.

How to attach pipe reducers? There are following steps which helps us to in the attachment of pipe reducers.

Step 1 is to adjust the existing pipes before adding a pipe reducer into the plumbing lines.
Step 2 is to attach one side of the pipe reducer.

 

---

Stainless steel concentric reducers are a component where the center of both the ends of the larger diameter opening and the smaller diameter opening lies on the same axis. Stainless steel eccentric reducers are those in which the center of lines of both the pipes lie on the separate axis. These reducers are also responsible for maintaining the bottom of the pipe elevation of a particular pipe.

 

---

Standards	ANSI – B 16.9, ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’, API 590-605, ASME B16.9 – ‘Factory-Made Wrought Buttwelding Fittings”, ASME B16.25 – ‘Buttwelding Ends’, ASME B16.28 – ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’, MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications’
Schedule	Sch 5 TO Sch XXS.
Sizes	1/2"NB TO 48"NB IN / 1/2” TO 36”, (SEAMLESS UPTO 24”), (WELDED 8” TO 36” )
Outside Diameter	Seamless Pipe Reducers ( 1/2″～24″), ERW / Welded / Fabricated Pipe Reducers (1/2″～48″)
Materials	Stainless Steel ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Type	Butt Weld (BW) / Seamless / ERW / Welded / Fabricated Concentric Reducerss, Eccentric Reducers
Wall Thickness:	3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Value Added Services	Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
Production Grades	Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel, Copper
Dimension	ANSI B16.9, ANSI B16.28, MSS-SP-43 Type A, MSS-SP-43 Type B, JIS B2312, JIS B2313

 

---

pipe reducer	Price Range	Unit
6 inch welded stainless steel pipe reducers	$1.00-$10.00	USD/Piece
connectors pipe fittings reducers	$0.50-$25.00	USD/Piece
stainless steel PVC pipe reducers	$11.50-$15.02	USD/Piece
pipe fitting eccentric / concentric reducers types 1/2” SCH10s	$1.00-$100.00	USD/Piece
Stainless steel welding pipe fittings Eccentric reducers	$2.00-$10.00	USD/Piece
Stainless Steel Butt Weld Pipe Fittings Concentric reducers	$10.00-$50.00	USD/Piece
schedule 40 stainless steel pipe reducers	$1.00-$10.00	USD/Piece
butt weld thick wall reducers	$6.10-$7.60	USD/Kilogram
ansi b16.5 gr2 titanium pipe reducers	$4.80-$900.00	USD/Piece
Brass material H59 hex head bushing brass thread pipe reducers	$1.00-$10.00	USD/Piece
sanitary round shape eccentric welded reducers	$0.40-$40.00	USD/Piece
sch40 black fitting concentric reducers	$1.00-$10.00	USD/Piece
Concentric Reducer WP11 CL3,WP22 CL1,WP22 CL3,WP24,WP5	$10.00	USD/Piece
butt weld concentric reducer pipe fitting	$0.50-$350.00	USD/Piece
schedule 80 carbon steel pipe fittings reducer	$0.10-$90.00	USD/Piece
Gr2 Titanium pipe fitting Concentric Reducer	$1.00-$20.00	USD/Piece
8 Inch Pipe Fittings Carbon Steel Speed Reducer	$0.50	USD/Piece
titanium grade7 large threaded pipe fitting eccentric reducer	$3.00-$60.00	USD/Piece
Welding Schedule 40 Steel Pipe Fittings Reducer	$1.00-$999.00	USD/Piece
ASME/DIN/JIS Carbon Steel Pipe Reducer	$0.10-$10.00	USD/Piece

 

---

• Stainless Steel Reducer; ASTM A403 WP Gr. 304, 304H, 309, 310, 316, 316L, 317L, 321, 347, 904L
• Carbon Steel Reducer: ASTM A 234 WPB , WPBW, WPHY 42, WPHY 46, WPHY 52, WPH 60, WPHY 65 & WPHY 70.
• Low Temperature Carbon Steel Reducer: ASTM A420 WPL3, A420 WPL6
• Alloy Steel Reducer: ASTM / ASME A/SA 234 Gr. WP 1, WP 5, WP 9, WP 11, WP 12, WP 22, WP 91
• Duplex Steel Reducer: ASTM A 815, ASME SA 815 UNS NO S31803, S32205. Werkstoff No. 1.4462
• Nickel Alloy Reducer: ASTM / ASME SB 336 UNS 2200 ( NICKEL 200 ), UNS 2201 (NICKEL 201 ), UNS 4400 (MONEL 400 ), UNS
• 8020 ( ALLOY 20 / 20 CB 3, UNS 8825 INCONEL (825), UNS 6600 (INCONEL 600 ), UNS 6601 ( INCONEL 601 ), UNS 6625 (INCONEL 625), UNS 10276 ( HASTELLOY C 276 )

 

---

• ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
• DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
• EN: EN10253-1, EN10253-2
• ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
• ASME B16.9 – Factory-Made Wrought Fittings Buttwelding
• ASME B16.25 – Buttwelding Ends ASME B16.28 – ‘Wrought Steel Short Radius Elbows and Buttwelding Returns
• MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

 

---

Eccentric Reducers Straight Pipe Reducers Pipe Reducers ASME B16.9 Reducers Buttweld Reducers ANSI B16.9 Reducers ANSI B16.11 Reducers Socket Weld To Threaded Reducers Seamless Concentric Reducers Socket Weld Eccentric Reducers Concentric Reducers Concentric Reducerss Pipe Reducerss Pipe Fittings Socket Weld Reducers Insert Pipe Reducerss Welded Concentric Reducers Buttweld Fitting Socket Weld Reducers Butt Weld Concentric Reducers Buttweld Fitting ERW Concentric Reducers Buttweld Fitting ASME B16.11 Reducers Reducerss Pipeline

Seamless Concentric Reducers Buttweld Fitting Threaded Eccentric Reducers Concentric Reducers Pipe Fittings Concentric Pipe Reducers Threaded Reducers Reducers Pipe Fittings Threaded Pipe Reducers Socket Reducers Adapter Buttweld Concentric Reducers Socket Weld Tee Reducers Butt Weld Concentric Reducers Pipe Reducers Fittings Threaded Concentric Reducers Steel Flanged Reducerss Fabricated Concentric Reducers Buttweld Fitting Npt Reducerss Metric Reducerss Large Steel Pipe Reducerss Steel Tube Reducerss Butt Weld Pipe Reducerss

 

---

 

---

 

---

Concentric reducers are widely used while eccentric reducers are applied to maintain the top and bottom pipe level. Eccentric Reducers also avoids trapping of air inside the pipe, and Concentric Reducer removes noise pollution.

 

---

Pressure drop coefficient for reducers, extension in direction of the flow

e.g.: C-RED, C-GR, C-KOVO

The pressure drop coefficient of extensions with a reduction in direction of the flow is determined as follows:

A₁ = Area of the opening
A₂ = Area of the exit

Specifying a value here does not make sense due to the fact that the pressure drop coefficient can be anywhere between 1.5 and 5000.

Pressure drop coefficient for reducers, reduction in direction of the flow

e.g.: C-RED, C-GR, C-KOVO

The pressure drop coefficient of extensions with an extension in direction of the flow is determined as follows:

A₁ = cross section of the opening
A₂ = cross section of the exit

 

---

ANSI/ASME B16.9 Butt weld Concentric Reducer/ eccentric reducer offset dimensions:

 

NPS	O.D. D	O.D. D1	Len H
3/4-1/2	26.7	21.3	38
1-1/2	33.4	21.3	51
1-3/4	33.4	26.7	51
1.1/4-1/2	42.2	21.3	51
1.1/4-3/4	42.2	26.7	51
1.1/4-1	42.2	33.4	51
1.1/2-1/2	48.3	21.3	64
1.1/2-3/4	48.3	26.7	64
1.1/2-1	48.3	33.4	64
1.1/2-1.1/4	48.3	42.2	64
2-3/4	60.3	26.7	76
2-1	60.3	33.4	76
2-1.1/4	60.3	42.2	76
2-1.1/2	60.3	48.3	76
2.1/2-1	73	33.4	89
2.1/2-1.1/4	73	42.2	89
2.1/2-1.1/2	73	48.3	89
2.1/2-2	73	60.3	89
3-1.1/4	88.9	42.2	89
3-1.1/2	88.9	48.3	89
3-2	88.9	60.3	89
3-2.1/2	88.9	73	89
3.1/2-1.1/4	101.6	42.2	102
3.1/2-1.1/2	101.6	48.3	102
3.1/2-2	101.6	60.3	102
3.1/2-2.1/2	101.6	73	102
3.1/2-3	101.6	88.9	102
4-1.1/2	114.3	48.3	102
4-2	114.3	60.3	102
4-2.1/2	114.3	73	102
4-3	114.3	88.9	102
4-3.1/2	114.3	101.6	102
5-2	141.3	60.3	127
5-2.1/2	141.3	73	127
5-3	141.3	88.9	127
5-3.1/2	141.3	101.6	127
5-4	141.3	114.3	127
6-2.1/2	168.3	73	140
6-3	168.3	88.9	140
6-3.1/2	168.3	101.6	140
6-4	168.3	114.3	140
6-5	168.3	141.3	140
8-3.1/2	219.1	101.6	152
8-4	219.1	114.3	152
8-5	219.1	141.3	152
8-6	219.1	168.3	152
10-4	273	114.3	178
10-5	273	141.3	178
10-6	273	168.3	178
10-8	273	219.1	178
12-5	323.9	141.3	203
12-6	323.9	168.3	203
12-8	323.9	219.1	203
12-10	323.9	273	203
14-6	355.6	168.3	330
14-8	355.6	219.1	330
14-10	355.6	273	330
14-12	355.6	323.9	330
16-8	406.4	219	356
16-10	406.4	273	356
16-12	406.4	323.9	356
16-14	406.4	355.6	356
18-10	457	273	381
18-12	457	323.9	381
18-14	457	355.6	381
18-16	457	406.4	381
20-12	508	323.9	508
20-14	508	355.6	508
20-16	508	406.4	508
20-18	508	457	508
22-14	559	355.6	508
22-16	559	406.4	508
22-18	559	457	508
22-20	559	508	508
24-16	610	406.4	508
24-18	610	457	508
24-20	610	508	508
24-22	610	559	508
26-18	660	457	610
26-20	660	508	610
26-22	660	559	610
26-24	660	610	610
28-18	711	457	610
28-20	711	508	610
28-24	711	610	610
28-26	711	660	610
30-20	762	508	610
30-24	762	610	610
30-26	762	660	610
30-28	762	711	610
32-24	813	610	610
32-26	813	660	610
32-28	813	711	610
32-30	813	762	610
34-24	864	610	610
34-26	864	660	610
34-30	864	762	610
34-32	864	813	610
36-24	914	610	610
36-26	914	660	610
36-30	914	762	610
36-32	914	813	610
36-34	914	864	610
38-26	965	660	610
38-28	965	711	610
38-30	965	762	610
38-32	965	813	610
38-34	965	864	610
38-36	965	914	610
40-30	1016	762	610
40-32	1016	813	610
40-34	1016	864	610
40-36	1016	914	610
40-38	1016	965	610

Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by customer.

 

---

Nominal Pipe Size	1/2 to 2.1/2	3 to 3.1/2	4	5 to 8
Outside Diameter at Bevel (D)	+ 1.6 - 0.8	1.6	1.6	+ 2.4 - 1.6
Inside Diameter at End	0.8	1.6	1.6	1.6
Overall Length (H)	2	2	2	2
Nominal Pipe Size	10 to 18	20 to 24	26 to 30	32 to 48
Outside Diameter at Bevel (D)	+ 4 - 3.2	+ 6.4 - 4.8	+ 6.4 - 4.8	+ 6.4 - 4.8
Inside Diameter at End	3.2	4.8	+ 6.4 - 4.8	+ 6.4 - 4.8
Overall Length (H)	2	2	5	5
Wall Thickness (t)	Not less than 87.5% of Nominal Wall Thickness

Dimensional tolerances are in millimeters unless otherwise indicated and are equal ± except as noted.

 

---

Nominal Pipe Size		D X D1	Thickness
IN	MM		T X T1 Sch. 10	T X T1 Sch.40	T X T1 Sch. 80	H
3/4 x 1/2	20 x 15	267 x 21.3	2.11 x 2.11	2.87 x 2.77	3.91 x 3.73	51
1 x 3/4	25 x 20	33.4 x 26.7	2.77 x 2.11	3.38 x 2.87	4.55 x 3.91	51
1 x 1/2	25 x 15	33.4 x 21.3	2.77 x 2.11	3.38 x 2.77	4.55 x 3.73	51
11/4 x 01	32 x 25	42.2 x 33.4	2.77 x 2.77	3.56 x 3.38	4.85 x 4.55	51
11/4 x 3/4	32 x 20	42.2 x 26.7	2.77 x 2.11	3.56 x 2.87	4.85 x 3.91	51
11/4 x 1/2	32 x 15	42.2 x 21.3	2.77 x 2.11	3.56 x 2.77	4.85 x 3.73	51
1 1/2 x 11/4	40 x 32	48.3 x 42.2	2.77 x 2.77	3.68 x 3.56	5.08 x 4.85	64
1 1/2 x 01	40 x 25	48.3 x 33.4	2.77 x 2.77	3.68 x 3.38	5.08 x 4,55	64
1 1/2 x 3/4	40 x 20	48.3 x 66.7	2.77 x 2.11	3.68 x 2.87	5.08 x 3.91	64
1 1/2 x 1/2	40 x 15	48.3 x 21.3	2.77 x 2.11	3.68 x 2.77	5.08 x 3.73	64
2.0 x 1 1/2	50 x 40	60.3 x 48.3	2.77 x 2.77	3.90 x 3.68	5.55 x 5.08	76
2.0 x 1 1/4	50 x 35	60.3 x 42.2	2.77 x 2.77	3.90 x 3.56	5.55 x 4.85	76
2.0 x 0.1	50 x 25	60.3 x 33.4	2.77 x 2.77	3.90 x 3.38	5.55 x 4.55	76
2.0 x 3/4	50 x 20	60.3 x 26.7	2.77 x 2.11	3.90 x 2.87	5.55 x 3.91	76
2 1/2 x 2.0	65 x 50	73.0 x 60.3	3.05 x 2.77	5.16 x 3.90	7.01 x 5.55	89
2 1/2 x 11/2	65 x 40	73.0 x 48.3	3.05 x 2.77	5.16 x 3.68	7.01 x 5.08	89
2 1/2 x 1.0	65 x 25	73.0 x 33.4	3.05 x 2.77	5.16 x 3.38	7.01 x 4.55	89
3.0 x 2 1/2	80 x 65	88.9 x 73.0	3.05 x 3.05 !	5.5 x 5.16	7.62 x 7.01	89
3.0 x 0.2	80 x 50	88.9 x 60.3	3.05 x 2.77	5.5 x 3.09	7.62 x 5.55	89
3.0 x 1 1/2	80 x 40	88.9 x 48.3	3.05 x 2.77	5.5 x 3.68	7.62 x 5.08	89
3.0 x 11/4	80 x 32	88.9 x 42.2	3.05 x 2.77	5.5 x 3.56	7.62 x 4.85	89
4.0 x 3.0	100 x 80	114.3 x 88.9	3.05 x 3.05	6.0 x 5.05	8.55 x 7.62	102
4.0 x 2 1/2	100 x 65	114.3 x 73.0	3.05 x 3.05	6.0 x 5.16	8.55 x 7.01	102
4.0 x 2.0	100 x 50	114.3 x 60.3	3.05 x 2.77	6.0 x 3.09	8.55 x 5.55	102
4.0 x 1 1/2	100 x 40	114.3 x 48.3	3.05 x 2.77	6.0 x 3.68	8.55 x 5.08	102
5.0 x 4.0	125 x 100	141.3 x 114.3	3.40 x 3.05	6.55 x 6.0		127
5 x 3	125 x 80	141.3 x 88.9	3.40 x 3.05	6.55 x 05.05	09.53 x 07.06	127
5 x 21/2	125 x 65	141.3 x 73.0	3.40 x 3.05	6.55 x 05.16	09.53 x 07.01	127
5 x 2	125 x 50	141.3 x 60.3	3.40 x 2.77	6.55 x 03.09	09.53 x 05.55	127
6 x 5	150 x 125	168.3 x 141.3	3.40 x 3.40	7.11 x 06.55	10.97 x 09.53	140
6 x 4	150 x 100	168.3 x 114.3	3.40 x 3.05	7.11 x 06.00	10.97 x 08.55	140
6 x 3	150 x 80	168.3 x 88.9	3.40 x 3.05	7.11 x 05.05	10.97 x 07.06	140
6 x 2 1/2	150 x 65	168.3 x 73.0	3.40 x 2.77	7.11 x 05.16	10.97 x 07.01	140
8 x 6	200 x 150	219.1 x 168.3	3.76 x 3.40	8.02 x 07.11	12.07 x 10.97	152
8 x 5	200 x 125	219.1 x 141.3	3.76 x 3.40	8.02 x 06.55	12.07 x 09.53	152
8 x 4	200 x 100	219.1 x 114.3	3.76 x 3.05	8.02 x 06.00	12.07 x 08.55	152
10 x 8	250 x 200	273.0 x 219.1	4.19 x 3.76	9.27 x 06.00	15.09 x 12.70	178
10 x 6	250 x 150	273.0 x 168.3	4.19 x 3.40	9.27 x 07.11	15.09 x 10.97	178
10 x 5	250 x 125	273.0 x 141,3	4.19 x 3.40	9.27 x 06.55	15.09 x 09.53	178
10 x 4	250 x 100	273.0 x 114.3	4.19 x 3.05	9.27 x 06.02	15.09 x 08.56	178
12 x 10	300 x 250	323.9 x 273.0	4.57 x 4.19	10.31 x 09.27	17.48 x 15.09	203
12 x 8	300 x 200	323.9 x 219.1	4.57 x 3.76	10.31 x 08.20	17.48 x 12.07	203
12 x 6	300 x 150	323.9 x 168.3	4.57 x 3.40	10.31 x 07.11	17.48 x 10.97	203
12 x 5	300 x 125	323.9 x 141.3	4.57 x 3.40	10.31 x 06.55	17.48 x 09.53	203
14 x 12	350 x 300	355.6 x 323.9	4.78 x 4.57	11.13 x 10.31	19.05 x 17.48	330
14 x 10	350 x 250	355.6 x 273.0	4.78 x 4.19	11.13 x 09.27	19.05 x 15.09	330
14 x 08	350 x 200	355.6 x 219.1	4.78 x 3.76	11.13 x 08.20	19.05 x 12.07	330
14 x 06	350 x 150	355.6 x 168.3	4.78 x 3.40 |	11.13 x 07.11	19.05 x 10.97	330
16 x 14	400 x 350	406.4 x 355.6	4.78 x 4.78	12.70 x 11.13	21.44 x 19.05	356
16 x 12	400 x 300	406.4 x 323.9	4.78 x 4.57	12.70 x 10.31	21.44 x 17.48	356
16 x 10	400 x 250	406.4 x 273.0	4.78 x 4.19	12.70 x 09.27	21.44 x 15.09	356
16 x 08	400 x 200	406.4 x 219.1	4.78 x 3.76	12.70 x 08.20	21.44 x 12.07	356
16 x 06	400 x 150	406.4 x 168.3	4.78 x 3.40	12.70 x 07.11	21.44 x 12.07	356
18 x 16	450 x 400	457.2 x 406.4	4.78 x 4.78	14.27 x 12.70	23.83 x 21.44	381
18 x 14	450 x 350	457.2 x 355.6	4.78 x 4.78	14.27 x 11.13	23.83 x 19.05	381
18 x 12	450 x 300	i 457.2 x 323.9	4.78 x 4.78	14.27 x 10.31	23.83 x 17.48	381
18 x 10	450 x 250	457.2 x 273.0	4.78 x 4.19	14.27 x 09.27	23.83 x 15.09	381
18 x 08	450 x 150	457.2 x 219.1	4.78 x 3.76	14.27 x 08.20	23.83 x 12.07	381
20 x 18	500 x 450	508.0 x 457.2	5.54 x 4.78	15.09 X 14.27	26.19 x 23.83	508
20 x 16	500 x 400	508.0 x 406.4	5.54 x 4.78	15.09 x 1270	26.19 x 21.44	508
20 x 14	500 x 350	508.0 x 355.6	5.54 x 4.78	15.09 x 11.13 |	26.19 x 19.05	508
20 x 12	500 x 300	508.0 x 323.9	5.54 x 4.78	15.09 x 10.31	26.19 x 17.48	508
20 x 10	500 x 250	508.0 x 273.0	5.54 x 4.19	15.09 x 09.27	26.19 x 15.09	508
20 x 08	500 x 200	508.0 x 219.1	5.54 x 3.76	15.09 x 08.20	26.19 x 12.07	508
24 x 20	600 x 500	610.0 x 508.0	6.35 x 5.54	17.48 x 15.09	30.96 x 26.19	508
24 x 18	600 x 450	610.0 x 457.2	6.35 x 4.78	17.18 x 14.27	30.96 x 23.83	508
24 x 16	600 x 400	610.0 x 406.4	6.35 x 4.78	17.48 x 12.70	30.96 x 21.44	508
24 x 14	600 x 350	610.0 x 355.6	6.35 x 4.78	17.48 x 11.13	30.96 x 19.05	508
24 x 12	600 x 300	610.0 x 323.9	6.35 x 4.78	17.48 x 10.31	30.96 x 17.48	508
24 x 10	600 x 250	610.0 x 273.0	6.35 x 4.19	17.48 x 09.27	13.96 x 15.09	508

 

---

The weight chart of butt weld reducer is covering the size from 3/4 inch to 24 inch, and available in Schedule 20, STD, 40, 80, 120, 160.

Nominal Size		SCH20	STD	SCH40S	SCH80S	SCH120	SCH160
DN	NPS
15	1/2		0.08	0.08	0.1
20	3/4		0.17	0.17	0.2
25	1		0.21	0.21	0.25		0.22
32	1 1/4		0.29	0.29	0.35
40	1 1/2		0.42	0.42	0.58		0.6
50	2		0.8	0.8	1.03		1.04
65	2 1/2		1.05	1.05	1.42		1.65
80	3		1.36	1.36	1.9
90	3 1/2		1.63	1.63	2.27		2.4
100	4		2.77	2.77	3.93		4.4
125	5		3.96	3.96	6		7.14
150	6		6.31	6.31	9.26		10.8
200	8	7.85	10.7	10.7	17.5	15	18.4
250	10	11.2	15.8	16.3	25.1	25.1	32.5
300	12	25.6	28.8	32.1	56.5	41.7	53.3
350	14	30.5	38.5	48.8	79	84.5	106
400	16	35.2	44.5	64.3	102	112	143
450	18	62.7	62.7	98.5	165
500	20	72.6	72.6		181
550	22	97	79.1	142	226
600	24	130	100

---

 

---

Austenitic Stainless Steels Reducers Pipe Fittings High Yield Buttweld Reducers Fittings Austenitic stainless Steels Reducers Pipe Fittings ASME / ANSI - B 16.9 Reducers Pipe Fittings Low Tempreture Concentric & Eccentric Reducers ANSI B16.28 Eccentric Reducers MSS SP-43 Butt Weld Reducers Galvanized Reducers (Concentric & Eccentric ) Concentric & Eccentric Reducers MSS SP-48 Welded Reducers Fittings ASME / ANSI - B 16.9 Concentric Reducers

ASME B16.25 Reducers Stainless Steel Buttweld Reducers Fittings MSS SP-43 Eccentric (Bell) Reducers ASME B16.25 Concentric & Eccentric Reducers Alloy Steel Reducers ASME B16.28 Seamless Reducers Fittings Concentric Reducers Butt Weld Pipe Fittings Eccentric Reducers Butt Weld Pipe Fittings Fabricated Buttweld Reducers Duplex Steel Reducers Pipe Fittings Buttwelding Fittings MSS SP-75 Reducers

---