Stainless Steel Tee

buy from Stainless Steel Pipe Reducing Tee manufacturers in india, buy Equal And Unequal Tee, ASME B16.9 Equal Tee Fitting at factory price, Suppliers of SS Tee Fitting, Buttweld Unequal Tee

Stainless steel tees directional flow for plumbing jobs, repair and more. These tees are used to combine or split a fluid flow. Tees are available in a variety of connection types, sizes and package quantities. Choose from several trusted brand.

ANSI B16.9 Pipe Reducing Tee Fittings suppliers, get Equal Tee And Reducing Tee Stock, Stockists of Barred Equal Tee, unequal tee pipe fitting, Check Equal Tee Weight Chart and Tee Dimensions ASME B16 9

A reducing tee is a T shaped pipe fittings with two outlets that cut at 90 degree to the main line. These tees are available with a combination of diverse outlets sizes. In this, the branch port size is smaller than the other ports of the run.Butt-weld unequal tee is designed, specifically for use in very low as well as very high temperature zones.

Pipe tee is a type of pipe fittings which is T Shaped also heaving two outlets, at 90 degrees to the connection to the main line. It is a short piece of pipe with a lateral outlet. Pipe tee is used to connect pipelines with a pipe at a right angle with the line. Pipe tees are widely used as pipe fittings.

 

This is an approximate Cost of ASME B16.9 Equal Tee Fitting in India. For factory price buy directly from SS Tee Fitting Manufacturers In India, check latest Equal Tee And Reducing Tee price list & stock sizes please mail us.

 

---

Standards	ANSI – B 16.9, ASTM A403 – ASME SA403 – ‘Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings’, API 590-605, ASME B16.9 – ‘Factory-Made Wrought Buttwelding Fittings”, ASME B16.25 – ‘Buttwelding Ends’, ASME B16.28 – ‘Wrought Steel Buttwelding Short Radius Elbows and Returns’, MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications’
Schedule	Sch 5 TO Sch XXS.
Sizes	1/2"NB TO 48"NB IN / 1/2” TO 36”, (SEAMLESS UPTO 24”), (WELDED 8” TO 36” )
Materials	Stainless Steel ASME / ASTM SA / A403 SA / A 774 WP-S, WP-W, WP-WX, 304, 304L, 316, 316L, 304/304L, 316/316L, DIN 1.4301, DIN1.4306, DIN 1.4401, DIN 1.4404
Type	Butt Weld (BW) / Seamless / Welded / ERW / Fabricated Equal Tee, Reducing Tee, Straight Tee, Pipe Tee, Pipe Cross
Outside diameter	Seamless Pipe Tee ( 1/2～24), ERW / Welded / Fabricated Pipe Tee (1/2～48), Thickness : SCH 5S, 10S, 40S (STD), 80S (XS), 160, XXS, (1,65 – 59.51 mm)
Wall Thickness	3mm – 40mm / SCH5, SCH10, SCH20, SCH30, SCH40, STD, SCH80, XS, SCH60, SCH80, SCH120, SCH140, SCH160, XXS
Variations	Welded & Seamless
Value Added Services	Hot Dipped Galvanizing, Epoxy & FBE Coating, Electro Polish, Sand Blasting, Threading, Soldering
Production Grades	Stainless Steel, Alloy Steel, Duplex, Nickel Alloys, Low temperature Steel, Carbon Steel, Cupro Nickel

 

---

Special price for ASME B16.9 Reducing Tee, Bw Equal Tee, Reducing Tee En 10253-2 manufacturer in mumbai, india, find ASME B16.9 Equal Tee and unequal tee dimensions and unequal tee weight chart

 

---

• ASME: ANSI B16.9, ANSI B16.28, MSS-SP-43
• DIN: DIN2605, DIN2615, DIN2616, DIN2617, DIN28011
• EN: EN10253-1, EN10253-2
• ASTM A403 – ASME SA403 – Standard Specification for Wrought Austenitic Stainless Steel Piping Fittings
• ASME B16.9 – Factory-Made Wrought Fittings Buttwelding
• ASME B16.25 – Buttwelding Ends ASME B16.28 – ‘Wrought Steel Equal Tee & Cross
• MSS SP-43 – ‘Wrought and Fabricated Butt-Welding Fittings for Low Pressure, Corrosion Resistant Applications

 

---

 

---

Saddle Tees Tees Pipe Fittings Forged Reducing Tees Forged Lateral Tees Forged STeesl Tees Forged Barred Tees Forged Welding Tees Threaded Tees Threaded Reducing Tees Threaded Tees Fittings Threaded Pipe Reducing Tees Socket Weld Reducing Tees Socket Weld Tees Buttweld Tees Unequal Tees Ansi B16.9 Pipe Tees Fittings Asme B16.9 Pipe Tees Fittings Buttweld Equal Tees

Equal Teess Butt Weld Equal Tees Barred Tees Pipe Fittings Sw Tees Pipe Fittings Y Tees Pipe Fittings Pipe Reducing Tees Asme B16.9 Unequal Tees Buttweld Reducing Tees Reducing Tees Outlet Tees Lateral Tees Straight Teess Equal Tees Tube Tees Pipe Tees Tees Fittings Equal Tees Fittings Pipe Tees Connector

---

Tees connect three lines of the same OD. Standard material is 300 series stainless.

Reducing tee is another type of pipe tee used in pipe and tube fittings. Reducing tee, like all pipe tees is in the shape of T with two ends of equal size and the third one slightly smaller. In other words, reducing tee is a type of pipe fittings in which the branch port size is smaller than the ports of the run.Equal tees are those tees which are the branch diameter of the tee is same with the main pipe or run pipe diameter of this tee. There are straight pipe tees which have the same size openings. Equal tee make them open of various size and two openings of the same size.

---

Stainless Steel	ASTM / ASME 201, 202, 301, 304, 304L, 310, 310S, 316L, 316TI, 317, 317L, 321, 347, 409, 409M, 409L, 410, 410S, 420, 430, 431, 441, 444, 446, 17.4PH, 904L
Super Duplex Steel	S32750
Duplex Steel	ASTM / ASME SA 790 UNS NO S 31803 , S 32205 , S 32550 , S 32750 , S 32760.
Carbon Steel	ASTM / ASME A 335 GRP 1 , P 5 , P 9 , P 11 , P 12 , P 22 , P 23 , P 91
Alloys Steel	ASTM / ASME A 691 GRP1 CR , 1 1/4 CR , 2 1/4 CR , 5 CR , 9CR , 91.
Nickel Alloys	Nickel Alloys 200, Nickel Alloys 201
Titanium	Grade 1, Grade 4, Grade 5(Ti 6Al-4V), Grade 6(Ti 5Al-2.5Sn), Grade 7, Grade 11, Grade 12, 8Ai-1Mo-1V, Grade 9(3Al-2.5V), 6Al-6V-25n, 6Al-2Sn-4Zr-2Mo, 6Al-7Nb, Grade 23(Ti 6AL-4V ELI), Grade 5 ELI
Inconel	Inconel 600, Inconel 601, Inconel 625, Inconel 625LCF, Inconel 686, Inconel 718, Inconel 800, Inconel 825, Inconel X-750 , Inconel 690, Inconel 602, Inconel 617, Inconel 925, Inconel A-289, Inconel AL-6XN, AL-904L
Hastelloy	Hastelloy C-22, Hastelloy C-276, Hastelloy C-2000, Hastelloy C-4, Hastelloy X, Hastelloy B, Hastelloy N, Hastelloy G
Molybdenum	ASTM / ASME A 182 GR F 5, F 9 , F 11 , F 12 , F 22 , F 91, ASTM B387, Ferro Molybdenum
Cobalt	Cobalt HS-6, Cobalt HS-4, Cobalt HS-25, Sterlite Grade 1, Sterlite Grade 6, Sterlite Grade 12, Sterlite Grade 21
Niobium	ASTM B394, R04200 R04210
Nimonic	Nimonic75, Nimonic80, Nimonic85, Nimonic90, Nimonic263, etc
Tungsten	W1 WAl1, W61, etc, Carbonide Tungsten, Copper Tungsten, Nickel Tungsten
Nichrome	Nichrome90, Nichrome80, Nichrome80A, Nichrome RW80, Nichrome75, etc
Magnesium	Magnesium AL017100, AL017140, AL017150, AL017160, AL017200, AL017210, AL017250, etc.
Tantalum	Tantalum - Grade 1.
Monel	Monel 400, Monel k500
MU-METAL	MU-METAL
Zirconium	Zirconium 702, Zirconium 705,Zirconium 705, Zirconium-2, Zirconium-4
Beryllium Copper	Alloy 25 UNSC17200
Aluminium	1050,1100, 2017, 7150, 7178, 7575, 2050, 7085, 2011 A92011, 2014A A92014, 2024 A92024, 2219, 5052 A95052, 5083 A95083, 5754, 6061 A96061 A86061, 6063, 6082 A96082, 7071 7020, 7050 A97050, 7075 A97075 A87075, 7175
Copper Alloys	C 11000, C 10200, C 12200, C 51100, C 51000, C 51900, C 52000, C 52100, C 74500, C 75700, C 75400, C 76400, C 77000, C 21000, C 22000, C 23000, C 24000, C 26000, C 26800, C 27000, C 27200, C 28000

 

---

---

• Steel Equal Tees pipe fittings: The three branches of tee have same diameters.
• Steel Reducing Tees / Reducer tee pipe fittings: The branch diameter is smaller than the main line diameter.
• Tee reducer is usually described as NPS diameters in 4” x 4” x 3”, 4” is the main line pipe diameter, and 3” is the reducing branch.
• Reducing tees is used more than equal tee since it has more functions and available for more environments.
• A straight or equal buttwelding Tees is available for all common diameters.
• A Reducing Tees not, because many diameters are not produced, or can not be produced.

 

---

• An equal tee-piece is where the pipe intersecting the main header pipe is the same diameter as the header pipe.
• An unequal tee-piece is where the pipe intersecting the main header pipe is of a smaller diameter than the header pipe
• Generally the mitre line or the joint line of an equal tee-piece will intersect as far as the centre line of the main header pipe.
• The mitre line or joint line of an unequal tee-piece will not intersect as far as the centre line of the main header pipe.

 

---

Butt Weld Tees

Ends in plain or beveled, connected by butt welding process. It can withstand higher pressure than other types.

Socket Weld Tees

Threaded Tees

 

---

• 304 stainless steel castings conform to ASTM A351 ACI Grade CF8
• 316 stainless steel casting conform to ACI Grade CF8M (316)
• NPT threads on pipe fittings conform to ASME B1.20.1
• Manufacturing facility is ISO 9001:2008
• Certified pipe fittings meet applicable chemical & mechanical properties
• Quality guarantee on all pipe fittings

 

Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by customer.

 

---

NOMINAL PIPE SIZE	OUTSIDE DIAMETER		CENTER TO END
Inch	D	P	C	M
1/2 x 3/8	21.3	17.1	25	25
1/2 x 1/4	21.3	13.7	25	25
3/4 x 1/2	26.7	21.3	29	29
3/4 x 3/8	26.7	17.1	29	29
1 x 3/4	33.4	26.7	38	38
1 x 1/2	33.4	21.3	38	38
1 1/4 x 1	42.2	33.4	48	48
1 1/4 x 3/4	42.2	26.7	48	48
1 1/4 x 1/2	42.2	21.3	48	48
1 1/2 x 1 1/2	48.3	42.2	57	57
1 1/2 x 1	48.3	33.4	57	57
1 1/2 x 3/4	48.3	26.7	57	57
1 1/2 x 1/2	48.3	21.3	57	57
2 x 1 1/2	60.3	48.2	64	60
2 x 1 1/4	60.3	42.2	64	57
2 x 1	60.3	33.4	64	51
2 x 3/4	60.3	26.7	64	44
2 1/2 x 2	73	60.3	76	70
2 1/2 x 1 1/2	73	48.3	76	67
2 1/2 x 1 1/4	73	42.2	76	64
2 1/2 x 1	73	33.4	76	57
3 x 2 1/2	88.9	73	86	83
3 x 2	88.9	60.3	86	76
3 x 1 1/2	88.9	48.3	86	73
3 x 1 1/4	88.9	42.2	86	70
3 1/2 x 3	101.6	88.9	95	92
3 1/2 x 21/2	101.6	73	95	89
3 1/2 x 2	101.6	60.3	95	83
3 1/2 x 1 1/2	101.6	48.3	95	79
4 x 3 1/2	114.3	101.6	105	102
4 x 3	114.3	88.9	105	98
4 x 2 1/2	114.3	73	105	95
4 x 2	114.3	60.3	105	89
4 x 1 1/2	114.3	48.3	105	86
5 x 4	141.3	114.3	124	117
5 x 3 1/2	141.3	101.6	124	114
5 x 3	141.3	88.9	124	111
5 x 2 1/2	141.3	73	124	108
5 x 2	141.3	60.3	124	105
6 x 5	168.3	141.3	143	137
6 x 4	168.3	114.3	143	130
6 x 3 1/2	168.3	101.6	143	127
6 x 3	168.3	88.9	143	124
6 x 2 1/2	168.3	73	143	121
8 x 6	219.1	168.3	178	168
8 x 5	219.1	141.3	178	162
8 x 4	219.1	114.3	178	156
8 x 3 1/2	219.1	101.6	178	152
10 x 8	273.1	219.1	216	203
10 x 6	273.1	168.1	216	194
10 x 5	273.1	141.3	216	191
10 x 4	273.1	114.3	216	184
12 x 10	323.9	273.1	254	241
12 x 8	323.9	219.1	254	229
12 x 6	323.9	168.3	254	219
12 x 5	323.9	141.3	254	216
14 x 12	355.6	323.9	279	270
14 x 10	355.6	273.1	279	257
14 x 8	355.6	219.1	279	248
14 x 6	355.6	168.3	279	238
16 x 14	406.4	355.6	305	305
16 x 12	406.4	323.9	305	295
16 x 10	406.4	273.1	305	283
16 x 8	406.4	219.1	305	273
16 x 6	406.4	168.3	305	264
18 x 16	457	406.4	343	330
18 x 14	457	355.6	343	330
18 x 12	457	323.9	343	321
18 x 10	457	273.1	343	308
18 x 8	457	219.1	343	298
20 x 18	508	457	381	368
20 x 16	508	406.4	381	356
20 x 14	508	355.6	381	356
20 x 12	508	323.9	381	346
20 x 10	508	273.1	381	333
20 x 8	508	219.1	381	324
22 x 20	559	508	419	406
22 x 18	559	457	419	394
22 x 16	559	406.4	419	381
22 x 14	559	355.6	419	381
22 x 12	559	323.9	419	371
24 x 10	559	273.1	419	359
24 x 22	610	559	432	432
24 x 20	610	508	432	432
24 x 18	610	457	432	419
24 x 16	610	406.4	432	406
24 x 14	610	355.6	432	406
24 x 12	610	323.9	432	397
24 x 10	610	273.1	432	384
	All Dimensions are in mm

 

---

Stainless Steel Reducing Tee Dimensions

The dimensions are in millimeters
Source : ASME B16.9 Tee– 2018

 

---

Stainless Steel Straight Tee Weight Chart, Equal Tee Weight, Reducing Tee Weight in Kg

Sch STD			Sch XS
NPS	LBS	KG	LBS	KG
1/2	0.35	0.16	0.45	0.2
3/4	0.45	0.2	0.6	0.27
1	0.75	0.34	0.88	0.4
1.1/4	1.3	0.59	1.6	0.73
1.1/2	2	0.91	2.25	1.02
2	3.5	1.59	4	1.81
2.1/2	6	2.72	7	3.18
3	7	3.18	8.5	3.86
3.1/2	9	4.08	12	5.44
4	12	5.44	15.8	7.17
5	21	9.53	26	11.79
6	34	15.42	40	18.14
8	55	24.95	75	34.02
10	85	38.56	105	47.63
12	120	54.43	160	72.57
14	165	74.84	240	108.86
16	195	88.45	280	127.01
18	249	112.94	332	150.59
20	342	155.13	480	217.72
22	414	187.79	550	249.48
24	528	239.5	610	276.69
26	770	349.27	875	396.89
30	1060	480.81	1200	544.31
36	1490	675.85	1700	771.11
NPS	LBS	KG	LBS	KG

 

---

NPS	LBS	KG
1/2	0.36	0.16
3/4	0.58	0.26
1	1	0.45
1.1/4	2	0.91
1.1/2	3	1.36
2	5	2.27
2.1/2	8	3.63
3	10	4.54
3.1/2	–	–
4	25	11.34
5	55	24.95
6	62	28.12
8	110	49.9
10	260	117.93
12	480	217.72
NPS	LBS	KG

 

---

NPS	O.D. D	O.D. D1	Center to End C	Center to End M
3/4 - 1/2	26.7	21.3	29	29
1 - 1/2	33.4	21.3	38	38
1 - 3/4	33.4	26.7	38	38
1.1/4 - 1/2	42.2	21.3	48	48
1.1/4 - 3/4	42.2	26.7	48	48
1.1/4 - 1	42.2	33.4	48	48
1.1/2 - 1/2	48.3	21.3	57	57
1.1/2 - 3/4	48.3	26.7	57	57
1.1/2 - 1	48.3	33.4	57	57
1.1/2 - 1.1/4	48.3	42.2	57	57
2 - 3/4	60.3	26.7	64	44
2 - 1	60.3	33.4	64	51
2 - 1.1/4	60.3	42.2	64	57
2 - 1.1/2	60.3	48.3	64	60
2.1/2 - 1	73	33.4	76	57
2.1/2 - 1.1/4	73	42.2	76	64
2.1/2 - 1.1/2	73	48.3	76	67
2.1/2 - 2	73	60.3	76	70
3 - 1.1/4	88.9	42.2	86	70
3 - 1.1/2	88.9	48.3	86	73
3 - 2	88.9	60.3	86	76
3 - 2.1/2	88.9	73	86	83
3.1/2 - 1.1/2	101.6	48.3	95	79
3.1/2 - 2	101.6	60.3	95	83
3.1/2 - 2.1/2	101.6	73	95	89
3.1/2 - 3	101.6	88.9	95	92
4 - 1.1/2	114.3	48.3	105	86
4 - 2	114.3	60.3	105	89
4 - 2.1/2	114.3	73	105	95
4 - 3	114.3	88.9	105	98
4 - 3.1/2	114.3	101.6	105	102

Dimensions are in millimeters unless otherwise indicated. Wall thickness (t) must be specified by customer.

 

---

 

 

---

To manufactured pipe tee various methods are used, these are the different type of Hot and cold forming process.

• These methods are
  • Hot forming or Extrusion Method
  • Hydraulic Bulge method – Cold forming
  • UO or Single weld seam Method
  • Monaka or Double weld seam Method

Hydraulic Bulge Method

Hydraulic Bulge method is used to manufacture Tee. Cut piece of Pipe is placed in hydraulic die and liquid is fill inside the pipe, Hydraulic pressure pushes out the branch, in the fixed opening in the die. This method gives the good surface finish. However, higher thickness Tee cannot be manufactured by this method.

 

Hot Extrusion Method

Tee with large diameters, heavy wall thickness and /or special material with challenging workability that cannot be manufactured using the hydraulic bulge method are manufactured using hot Extrusion Method. In hot Extrusion Method, Normally Bigger diameter pipe is used than the finished product size, the branch outlet is extruded from the pipe with help of extrusion tool. Other dimensions of body and branch can also be adjusted by pressing the die if required.

 

---

Sch 40 Tees ASME B16.28 Buttweld Equal Cross Butt Weld Pipe Equal Cross STeesl Equal Cross Pipe Fittings ASME B16.9 Reducing Tees Stainless STeesl Mechanical Tees Inconel Butt weld Equal Cross Schedule 80 STeesl Pipe Tees High Quality Equal Cross Copper Nickel Equal Cross Stainless STeesl Equal and Unequal Tees SS Equal Tees Seamless Butt weld Equal Tees SS Equal Cross Fittings Stainless STeesl Straight Tees Stainless STeesl Elbow Tees Carbon STeesl Unequal Tees 1/2 Stainless STeesl Tees Hastelloy Equal Cross Stockist Tees ASTM A234 WPB Duplex STeesl Buttweld Equal Cross Stainless STeesl Reducing Tees Flanged Stainless STees Tees

Stainless STeesl Unequal Tees ASTM A403 Stainless STeesl Equal Tees ASME B16.9 Butt weld Equal Tees Stainless STeesl Equal Tees Super Duplex STeesl Buttweld Equal Tees Stainless STeesl Tees Straight Tees Reducing Stainless STees Tees Carbon STeesl Equal Tees 1 inch Stainless STees Tees ANSI B16.9 Equal Tees Stainless STeesl Tees Stainless STeesl Flanged Tees Schedule 10 Reducing Tees Buttweld Equal Tees High Nickel Alloy Equal Tees Stainless STeesl Split Tees Titanium Buttweld Equal Tees 304L Stainless STeesl Reducing Tees Stainless STeesl Pipe Tees Equal Tees ASTM A403 Tees Welded Butt weld Equal Tees